Fuel Pump Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 23, 2004
Threads
31
Messages
107
Location
Seattle, Washington
I searched the archives, but could not find what I'm looking for. Two days ago my 97 Cruriser (87K miles) ran perfectly until late in the day I noticed a very slight stutter when stepping on the accelerator - almost like it was going to cut out. Yesterday I go to start my truck and I heard this weird whine, my truck would not start immediately, and when it did it was cutting out. This was followed by a very strong odor of gasoline. Is this my fuel pump going out? If I can keep it running, is it safe to drive it 2-3 miles to my mechanic? Any help or comments would be appreciated.

Thanks,

Mike
 
leaks visible?
 
I am like 0 for 10 on this advise but anyway it sounds like the fuel pump realy

the FPR has 2 positions,
high voltage (12v) for starting and acceleration,
low voltage through the fuel pump resistor used for cruise.

you description is consistant for a problem on the high voltage side of the relay,

LandTank has a description on cleaning the FPR contacts, will only cost you a few minutes time and a matchbook to try it.
 
It's possible that you're fuel pump is working fine (smell of fuel) and this is an EFI related issue.

I would check for spark at the next "no start".

FYI 80 Series fuel pumps are easy to replace and pretty much last a very long time. There is a pre-filter (fuel sock as some call it) on the pump housing. This pre-filter is a nylon mesh and when it becomes clogged it will collapse on itself blocking the intake. From personal experience they have a lifespan of 100K miles when only good quality fuel is used.
 
Jon,

Do you know if anyone has been successful in replacing (or rebuilding) just the fuel pump itself? The electric pump is a smaller component on the fuel pump assembly that has a level sensor, pick up tubes, etc. Toyota only sells the complete assembly and I don't want to carry a spare because it's so big and bulky but I would like to have a spare pump if that makes sense.

-B-
 
Talk to John Hocker at Sierra Toyota. He is my parts guru and knows all. He knows what you need before you do.

(520) 458-8880
john_hocker@sierratoy.com

4 or 5 years ago I was sure my FP was failing and ordered a replacement from him. Turned out to be a clogged pre-filter.
I gave my original fuel pump to a local GCLC guy to use in his rig and AFAIK it's still running today.

Make sure you order the OEM gasket for the FP access plate on top of the tank and the rubber cushions for the fuel pump motor and the teeny weenie retaining clip that holds the pre-filter in place.

Keep in mind you'll be opening up a 5x7 hole on top of your fuel tank. Put your cigarette out first.
 
Talk to John Hocker at Sierra Toyota. He is my parts guru and knows all. He knows what you need before you do.

Thanks but no thanks. I already get everything I need from the best parts man in the world and, on top of being the best, he gives the best prices.... bar none. CruiserDan's the man.

-B-
 
Back
Top Bottom