Fuel line question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 31, 2005
Threads
77
Messages
4,192
Location
Denver CO
So the outlet of my fuel pump started leaking a little while ago, leaving a small puddle of fuel on the ground after shutdown :eek: . Took the fuel pump off, cleaned it up and inspected it, and it looks like the ferrel wasn't seating right to seal properly.

Okay, so I went to the Toyota dealer...guess how much they want for a new one? $5.10. Now did they just pull up the part wrong or do they really cost this much? It's like a one-time use deal...it gets crushed once and that's it, so how can it cost $5.10? I mean, it's a piece of brass that has a bulge in it, how much can THAT cost to make? Like $.02? I checked out some other places and got a few for $.60...that's more like it...except they don't work! :mad: Okay, now I'm getting mad...it's gotta be WAY more complicated than it needs to be. So does anybody know where I can source these little beauties?

I wish I had a digital camera, but the problem with the ones I got is that they are too long so the nut can't thread. If I could use 1/4 inch or 3/8 inch ones they are the right length...but the fuel harline is .310 inch OD, so 1/4 is too small and 3/8 is too big! Has anybody ever run into this problem before? I can't get a standard size fuel line and ferrel, because the ferrel won't seat properly in the nut, and if I get a standard nut it won't thread onto the fitting! What to do...it would have been a great day to drive the Cruiser today with the top off rather than watch it sit in the driveway :crybaby: Err...why why WHY!!!! :mad:

It was a beautiful day today though...painted my bezel white...now I'm happy :bounce:
 
Half way between 1/4 inch and 3/8 inch would be 5/16ths. Good place to start. Two for 44 cents at our local OSH. ;)
 
65swb45 said:
Half way between 1/4 inch and 3/8 inch would be 5/16ths. Good place to start. Two for 44 cents at our local OSH. ;)


lol 5/16 i wanted to know what the little tick on the tape ment lol
 
rogersfj401969 said:
lol 5/16 i wanted to know what the little tick on the tape ment lol

Coming from a college boy, that doesn't surprise me! :flipoff2:

Fix your junk so we can go wheelin.
 
Um...maybe I'm looking at the wrong hardware stores but I haven't seen a 5/16ths ferrel. I'll have to check again I guess. If that's available then I'm good to go.
 
Found some! Guess what...$0.19 :bounce: Now I just gotta wait until Wednesday to slap it all back together...(patience, patience) :D
 
Back
Top Bottom