Hoping someone here can help me out because my local dealer has ordered the wrong bolts 4 times now. After looking at the parts diagrams myself, I'm really not sure which ones I need either. I've lost three of these so far for whatever reason - probably need to be using thread locker to secure the replacements. It's a 2017, 200 series - Thanks in advance for any help you can offer.
Front splash guard trim bolt/screw part number
- Thread starter 717av8r
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
90109-06375 for a 2013. Should be the same part, looks identical.
Also, you shouldn’t need thread locker, but you do need to tighten them past when the washer contacts the plastic. They’ll suddenly get harder to turn when the fatter part of the bolt shank contacts the metal skid under the plastic part.
I only know the number because the threads on my originals were rusty.. haven’t ever lost one. I actually put grease on the threads of mine to prevent that rust.
I only know the number because the threads on my originals were rusty.. haven’t ever lost one. I actually put grease on the threads of mine to prevent that rust.
- Thread starter
- #4
That looks like them, Thanks much for the help! I‘ll try tightening down farther and hopefully won’t lose any more.
Should be. Every 200-series picture I’ve seen seems to have the same parts in that area.