Front engine oil leak hunt

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 11, 2016
Threads
3
Messages
3
Location
Alaska
Hey forum! Just picked up a '96 lx450 a few months ago! Loving it, but am getting tired of the oil leaking on the driveway. I have the oil pump o-ring, crank seal, and crank sensor seal to replace. My question is can I start the engine while the harmonic balancer, fan, and belts are off to see if the front pan arch is leaking also? Or is that not a good idea? Thanks!!
 
I wouldn't do that. your leak will most likely be the oil pump gasket. my came apart in 6 pieces after I got the cover off.

If you don't have one, do yourself a favor and get the 1/4 inch impact gun mentioned in most of the recent posts about the oil pump gasket. it is worth its weight in gold.

I'd also recommend removing the fan clutch and shroud and putting the fan clutch and fan back on, and let the engine idle to get warm before starting the oil pump gasket. the heat will help with backing out the screws.
 
Not a good idea. My advice is to pressure wash the front of the engine and keep an eye on where the oil is coming from. I would also start at the top and work my way down. I didn't see the dist. o ring on your list, but that is a common leak point on these engines.
 
check Valve cover gasket, check inside the distributor if there's any oil, check the oil pan gasket...
 
I would also start at the top and work my way down. I didn't see the dist. o ring on your list, but that is a common leak point on these engines.

This. Gaskets arent super expensive, and yours could be as much as 20 years old. Start with the valve cover, do the dizzy, get the crank and the oil pump and replace the galley plug while youre at it.

I did this on mine and have been leak-free ever since.
 
Back
Top Bottom