Front Control Arm Bolts (frame side)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2007
Threads
100
Messages
461
Location
Germantown MD
Is the frame side front control arm bolt tightened to 127 ft-lb like the 2 under the axle?

My FSM states 127 ft-lb for the ones that bolt to the axle but does not mention the frame side. It was a lot harder to get these loose so I am guessing they need to be tighter.

TIA
 
They are all 130 IIRC. Obviously the only consideration is which part of the fastener is fixed and which part you turn, which varies from bolt to bolt on the control arms.
 
Axle housing end bolts (16mm) 127 lb-ft, hold the nut, turn the bolt.

Frame end bolts (18mm) 130 lb-ft, hold the bolt, turn the nut.


D-
 
Back
Top Bottom