Front bumper finished !

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 15, 2017
Threads
18
Messages
588
Location
Worland, WY

A couple of my shooting buddies run a fan shop and make hardened steel targets. Enlisted their help and drew up this bumper in google sketch-up and on graph paper. They did the laser cutting and bending. Center(winch mount) section is 3/16" and sides are 1/8". Rectangular cut-out underneath is for an LED bar that I don't have yet. Plans are synthetic line for the winch and a Hawse fairlead soon. Didn't get the moonglow pearl paint in time to get it coated like I'd wanted to, but it's not off terribly from that color and far better than the unprimered coat of black I slapped on in a hurry before it was 'finished' a couple months ago. Still need to install the 4" lift, but the brake lines are giving me some trouble and I feel like I'll re-do the hard lines from the engine compartment back(because I have to) and delete the LSPV while
I'm at it. L But that's something for a different thread . . .in the meantime the 35s are the bumpstops occasionally :(
 
I'll get some different angled pics tomorrow.

Guessing it weighs about 80lbs. Winch is heavy too but that synthetic line should cut lots of weight off. Same roller vs hawse fairlead.
 
Got some front clip damage and need a new radiator core support, but I've got a new lower valance(or whatever houses the blinkers is called) and I'm looking forward to getting the front fixed.
Sure been eyeballing that thread with new grills too(aftermarket) and I'd love to try one out after repairs.

Here's some other angles. Ain't perfect, but I'm happy with it.


I couldn't draw compound angles in sketchup, so it was short straight lines for the body curves and was pretty evident after the laser cut it. So I tacked the 2 side pieces together and smoothed them out(opening the gap up more). Plus one frame rail was tweaked somewhat and that surely didn't help with alignment of it all.
 
Got some front clip damage and need a new radiator core support, but I've got a new lower valance(or whatever houses the blinkers is called) and I'm looking forward to getting the front fixed.
Sure been eyeballing that thread with new grills too(aftermarket) and I'd love to try one out after repairs.

Here's some other angles. Ain't perfect, but I'm happy with it.


I couldn't draw compound angles in sketchup, so it was short straight lines for the body curves and was pretty evident after the laser cut it. So I tacked the 2 side pieces together and smoothed them out(opening the gap up more). Plus one frame rail was tweaked somewhat and that surely didn't help with alignment of it all.

I love that, I need a new bumper, and I hate the cookie cutter ARB one, I want to do my own, I really like you design, can you send me the pieces and I can weld it up :hillbilly:
 
I love that, I need a new bumper, and I hate the cookie cutter ARB one, I want to do my own, I really like you design, can you send me the pieces and I can weld it up :hillbilly:

I'll ask my guys. They're in Sioux Falls, SD. Need to make a few revisions first though(so it'll be a smoother build).
 
Back
Top Bottom