Front brake line bracket extension

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 25, 2013
Threads
70
Messages
762
Location
Lakewood, Ohio
A few weeks (maybe months) ago I thought I saw post about an bracket extension for the front brake line.

Example on a heep:
Redirect Notice

I’ve lifted my truck and have about 5k miles with the bracket unattached which works, but doesn’t feel super safe. If the bracket works that’s fantastic and i’d Like to go that route. Problem is, I can’t find that post/ thread anywhere...
 
Don't see a pic of a front, this is rear, but same concept. Hard lines need to be mounted, if flopping around, tend to crack at the flairs.
rich_8-jpg.797659
 
This is great fellas. Thanks!
 
Here’s where I’m at on the fronts. Do I drill and tap a new hole inline with the upper bracket bolts, or do I hang the bracket at an angle using the original mounting point of the bottom bracket.

My gut says new mounting point in frame inline with the the bolts of the upper bracket, however my brain cannot confirm.

Note: I’ve straightened the hard line somewhat.

BC0E9C0B-8F1D-4C10-AF82-EEBB1A1D2B49.webp


Don't see a pic of a front, this is rear, but same concept. Hard lines need to be mounted, if flopping around, tend to crack at the flairs.
rich_8-jpg.797659
 
Last edited:
I decided to just go for it:
454749C9-8B64-4CD2-BA69-EE147BFF6014.webp
 
Guess i was stupid i just replaces all my lines with Slees stainless kit didn't need to extend anything. Now don't have to worry about the old lines being soft and spongy

If I hit the spongy stage I’ll think about the upgrade, but for now this will do I stop super well as is.
 
Back
Top Bottom