Front Axle Leak

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 23, 2008
Threads
8
Messages
28
I have noticed diff fluid around my right front tire. I am assuming I need a new set of frnt Axle seals. How difficult is this process? I would consider myself a amature mechanic...I have heard its a $1500 gig at toyota direct, probably a bit less at a private mechanic.

Any suggestions on what else I should have done while i am in there?

Some experienced advice would be awesome
 
Start here: https://forum.ih8mud.com/80-series-tech/78276-front-axle-rebuild-faq.html

It is a great idea for all new members to become familiar with the FAQ portion of the 80-Series section here on IH8MUD. This particular thread is in the maintenance part of the FAQ but there are many other threads in the FAQ that are very valuable to new members and will help get you up to speed after a few days of reading.

-B-
 
front axle rebuild

I got a great kit with Marlin Crawler big size seals from marlin Crawler for about $100,Japaneese bearings included excepd no wheel bearings ,did not need them.
 
I just finished the second part of my front end job. I did the driver's side last year and the passenger this year. The hardest part in my opinion is the cone washers on on the steering control arm and the second is the cone washers on the front hub. Invest in a brass hammer to beat the hub gently and either a large cold chisel or brass drift to beat the steering arm. When you order your kit from C-Dan, I would get a few extra cone washers for both the hub and steering arm. They can go flying and they are cheap. Also make sure you have a set of snap ring plyers. The front hub socket from C-Dan for $25 is a must too. I would also order a couple extra front seals. They are cheap and it is possible to mess them up putting them in especialliy it is your first time. I had a close call when I did mine. The guide Ken put together excellent. It is well illustrated, very detailed, and the quality easily surpasses any shop manual.
 
FAQ Usage

I'm a newbie and thought that since this thread made mention of the FAQ, I'd lob a question about the topic straight off.

From the home page there is a 'FAQ' link; following it provides general about the site; not quite tech info that we might be surfing for.

From the 80-series tech page, there is a nice advanced search that will let me narrow the scope of my search there but I don't see how to access any list of FAQs. Does such a link exist?

I'm sure I'm just blind but this site, while packed with info and clearly a helpful user community, can be "content dense".

Thanks, Paul
 
No problem. The moderators (Jamie & Ken) have done a great job gathering the relevant threads and putting some structure to all of the information. We really need to move the FAQ to the next level though. It is looking like Woody is building a Wiki and that is a possibility for the "new FAQ". A lot of work will be needed though. Are you volunteering? :D

-B-
 
G'day,

Newbie as well, used info on this site to do axle seals, swivel hub bearings and wheel bearings. damn useful, check tech section for other info.

Cheers,

Ross.

(Getting my first ten posts).
 
Great link to the FAQs section....Thanks. I am alomost convinced to start work this weekend. One thing that caught my eye is the 100 series front brake conversion, but when I tried searching through the FAQ page, I couldnt come up with ANY results. Is there a trick to using that search page?
 
I was in your same boat when I bought my cruiser last year. I am definitely amateur, and did the job in 2 days, about 15 hours total. Definitely saves tons of money, and connects you with the truck in a weird way. Good luck...

Joel
 
Tennessee80- That gives me some confidence, thanks.

Does anyone have an opinion on whether to use stock seals or an aftermarket "improved" versions? Joe Egolf mentioned Marlin Crawlers...but I guess my stock seals have lasted 125k miles and 11 years...so I am temtped to stay OEM.
 
Back
Top Bottom