For Sale / Wanted To Buy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Well, I tried my best but some other lucky SOB snatched this up 5 minutes after it was posted:

Image%202015-02-23%20at%2012.54.35%20PM.png
 
Because it hangs low?
It has to pass under the xmember or body mount doesn't it (not a 40 guru) but seems I've seen several "close to stock" with low driver side exhaust routing


But I will say that doesn't look like spring green. Can't tell if its the orange showroom walls or a crappy mix. Looks closer to dune beige 416 in most pics
 
Because it hangs low?
It has to pass under the xmember or body mount doesn't it (not a 40 guru) but seems I've seen several "close to stock" with low driver side exhaust routing


But I will say that doesn't look like spring green. Can't tell if its the orange showroom walls or a crappy mix. Looks closer to dune beige 416 in most pics

I was referring to the "aluminum exhaust to factory specs".
 
Seems cheap?
Are you referring to the 2wd toyota? I should have held onto my 4wd. Now is not the time to buy a vehicle, prices are way up from just 2 months ago because it is now tax time. Thats a $1500 truck IMHO, but I'm cheap and wouldn't pay that. I paid that for the ext cab 4wd '89 I had.
 
Well, I tried my best but some other lucky SOB snatched this up 5 minutes after it was posted:

Image%202015-02-23%20at%2012.54.35%20PM.png

I called this guy today because the ad was still up. He said he just hasn't gotten around to taking it down. Kind of irritating.
 
I've driven them before. Tight fit, but fine for running around town.
 
@wnckeith - I think I posted your CL ad up in the ONSC classifieds also about a week ago.

We all were curious if they are welded or riveted?

good price
 
Selling for someone I know through work. I will try to get more detailed pictures posted soon, these are just all he has right now. Contact me if you want to see this car in person and I can set up a time with the owner to look at it, test drive, etc.

The good:

Most work was professionally done by Iron Pig Off Road (IPOR).
1984 FJ60
5-Speed H55F (Installed new)
Marlin Crawler 4.70:1 toybox (installed new)
Split-case x-fer case
Twin-stick from George (orangefj45)
4.11 diffs
ARB air-lockers
ARB air compressor
Safari Snorkle with Donalson pre-air filter box and Australian-spec air-filter box from SOR


2F engine runs excellent; 149,700 miles;
Head rebuild by Simon (Tyson Automotive Machine), 4-angle grind, etc. (3,000 miles ago)
Carb rebuilt by Marks Offroad, Dissy recurved by Jim Chenoweth, desmogged
New head gasket, new water-pump, etc.
Man-a-fre ceramic coated tuned headers, 2-into-Y system
Magnaflow muffler with 2.5” cat-back system

OME Heavies lift
ARB Front Winch Bumper w/ shackles, powder-coated
IPOR custom-made Rear Bumper, spare-tire mount, hitch, ladder, shackles, power-coated
IPOR custom sliders welded to frame, powercoated
IPOR custom rock-protector bottom plate, heavy-duty, weights about 100 lbs!
Hi-lift Xtreme Jack
IPF lights
LED cabin lights

Warn 8254-50 Winch (installed new; since water leaked in it, replaced with new motor & Albright solenoid & resealed)
12Volt-Guy Winch controller inside the cab
Dual-battery setup with IPOR solenoid setup, you can self-jump with one click if the main battery is drained.
Alpine Stereo w/Bluetooth Phone and iPhone connection
10” Kicker Subwoofer
4 Jenson speakers

(5) Mickey Thompson Baja MTZ 33x12.5x15
(5) 15x8 Black Wheels, 3.25 B/S, powder-coated
Front Procomp reclining bucket seats (not pictured)
Seat covers
Chest seatbelts installed for the rear passengers also
Repainted by the previous owner a few years ago.
All fluids were drained and replaced; hubs and birfields repacked, etc.


Needs Work:

There are 3 smalls spot with rust bubbles. I grinded them down to bare metal and primed them for now. I will try to take pictures of those.
The gas door lock is missing but I still got the lock cylinder.
The original carpet is still there but would be nice to have new carpet installed

Located in Raleigh, NC (also on ONSC for sale/wanted page)
Asking $15,000


84 fj60(2).webp


84 fj60(3).webp


84 fj60(4).webp


84 fj60.webp
 
Back
Top Bottom