flex with stock suspension....possible?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2006
Threads
23
Messages
121
Location
Fayetteville, Arkansas
Just wondering what people out there thought. I understand some of you may think this is rediculous I am just fumbling this idea for now so if you have any suggestions lets here them. I am wanting to keep my cruiser very very low to the ground like cutting the rear fenders and putting on 35's stock, that low. The problem is I want to have down travel with the suspension, not really worried about up. I live in Arkansas up travel is not that important here but climbing hills is. I was thinking of using revolver shackles or something to that nature or maybe a 3/4 eliptic not really sure. Just wanted to know if anyone has done this or tried it. I just got finished flipping the rear springs today and was interested.
 
I am pretty sure I have a small lift on it now, the springs definetly have an arch to them and it sits pretty well over the 31 mud terrains on it now, I think 35's will fit on it now easily especiall since I have the front fenders completely off and am trimming the rear to the wheel wells, I was thinking of using the shackles treerootco has
 
I bet with trimming and my old 4" lift kit you could get what you're looking for easily ;)

I think with your 4 inch kit and the amount of trimming I am talking about I could run 37-39 inch tires, keep in mind I am going for the stuffed fender look with downtravel maybe 2=4 inches of up
 
you can do it. Be prepared to raise your fendes, both in back and in front. I've been thinking some time on this very subject. Raise the front fenders to the hood and the rear wheel wells to the top of the tub and you should be able to run ~37" tires. Low and stable.
lets see pics when it is done.
PMK
 
I finished hacking on the rear fenders today will post pics tomorrow. The PO must have some form of lift on this because it sits high over 31's and I think 35's will fit on easily with no major trimming. I am trying to find some 35's to use for the mean time till I buy new to try and mock the suspension and start testing things out. Anyone got any good ideas for shackles or ways to increase down travel. Someone has to know something
 
Up travel is severly underrated by many. Unless you are running a stiffer suspension than you really want for good flex, you need uptravel to avoid bottoming oput the suspension on rough trails at any speed higher than a walking pace. Not talking about rallying down, the trails, just moving along to get somewhere.

How much room to you have before you're on your bumpstops?


Mark...
 
How much room to you have before you're on your bumpstops?


I have about 5 inches before it hits the bump stop now and I do not intend on going fast with this thing ever, and I do mean ever
 
If you've got five inches to you bumpstops, your suspension is not stock. Unless you have brand new OEM springs.

Regardless, less than 4 inches of uptravel will not be usable on the trails unless you have very stiff springs (minimal down travel then), very smooth trails (what's the point then), or you limit your speed to under 5mph over any bumps at all.

4 inches can be doable. 2 inches can not.


Mark...
 
Mark,
Does swapping the rear lower shock mounts to the newer style (below the axle) and front upper shock mounts from MAF help with flex?
 
I dont think I have stock springs either because the seem a little cushy and have a good arch to them and they are not brand new however I can see where someone peeled the stickers off the top springs at one point. Kinda hard to know since the person I got it from bought it like it is and knows nothing about it. I think what I am going to do is put on the tires I want and drive it and if I find out that I don't have enough uptravel then I will look at how to get more lift, I just intend to run with no front fenders at all and the rear is cut out to the inner wheel well and with the springs on it now I could stuff 37-39 tires on it now and maybe hit metal in the back but I think 35's will work great for what i intend to do in the beginning. The SOA and 37's will come after everything else is beefed up to withstand it. Does anyone have any suggestions on how to get good down travel though?
 
Open up your spring clamps so that whenyou dropp only the man leaf is resisting flex. If you want to go to the effort of relocating your shackle hangers inwrds and running longer shackles at very mild angles, this can really help droop. Long shocks of course (which means relocated shock mounts and/or new shock towers.


Mark...
 
thanks for the input mark I will try probably all of those things, started sanding and painting the frame today thought I would post some pics of the flipped rear springs and cut fenders even though this thing looks like crap. It still has fender work to be done but it is a small step closer I guess.
DSC00320.webp
 
What if you take off the clamps on your leaf springs? I saw one that had just something there to keep them from going side to side. I thought about doing that. I'll look for pics.

kit.jpg
 
What if you take off the clamps on your leaf springs? I saw one that had just something there to keep them from going side to side. I thought about doing that. I'll look for pics.

That is pretty much whot opening up the clams does the part that would normally cross your springs and keep them together now just sticks up but keeps them from going side to side
 
I think those clams you see there are called a traction lift or something. Not entirely sure though if so it make your ride go solid as a brick
 
Back
Top Bottom