flex brake line question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2005
Threads
31
Messages
120
Location
arkansas
In the tech trivia under brakes/steering, it states:

front axle outer hoses (skips backing plate) - NAPA 38881 (longer) or 38878 (shorter)

What does it mean by it skips the backing plate. How does it skip the backing plate? What does this entail?
 
Threading the hose directly into the caliper so that you will not need the caliper jumper tube, flex hose or dust shield on the front axle.


:beer:
 
would it not be best to keep those components in place? If I use the shorter hose(napa 38878, 12.75") for the front would it still tread into the backing plate (Is the tread pattern the same at the caliper and the backing plate?)
 
Last edited:
I kept the backing plates, but routed the lines straight to the calipers w/the following braided lines/parts:

caliper end/adapter
EAR-592032ERL
Fitting, Brake, Steel, Zinc Plated, Male -3 AN to Male 10mm. x 1.0 Thread,
Pair $11.69

hard-line connector/adapter to braided line
EAR-989545ERL
Fitting, Brake, Steel, Zinc Plated, Male -3 AN to Female 10mm. x 1.0 Thread,
each $4.69

straight to straight in 12"
EAR-63010112ERL
Hose, Speed-Flex,-3AN Str to -3AN Str 12" Long, Teflon Lined, Assembled
each $9.88

I have had this setup for almost 1year without any issues...
If I was going to do it over, I would have ordered the 12" hoses w/90 on one side.
The 90's at the caliper would make for a cleaner routing.

Contact Earl's Tech Service:
(310) 609-1602

hth,
manny
 
My stock hoses in the front going to the backing plate are just a little too short, so I am wondering if I should just remove the backing plate and get the napa hoses. Would the shorter (12.75") or the longer (15.875") be best on my 79' 40. I would go measure, but my truck is at the shop and I won't be there until friday. I would like to get these on the way right now. I don't think it matters, but I am running 2" bs.

Many thanks in advance
 
Here's the short ones. I found the longer ones to be, er, a too long. FWIIW, you can use minitruck backig plates too. just remove the brakeline T as it won't be used.
071805-2a.webp
 
Last edited:
Back
Top Bottom