flare removal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 10, 2006
Threads
18
Messages
228
Location
Crime-free Southwest-Houston
Thinking bout going flareless. Maybe paint or bedliner in their place. What have some of ya'll done with holes left from the plastic retainers? Bedliner route seems like a easy fix, just metal tape and spray over it. How about the paint?
:beer:
 
I guess I need to get better at using the search on this site before I post my questions.
Alkaline: tell me about the reflex liner. Kinda like Durabak or other DIY stuff. Price and where to get.
:beer:
 
Reflex is spray on...a Rhino/Line-X competetor. It is often cheaper than both of the others and is sprayed on thicker, that is because the installer gets to choose his price. I'm lucky in the fact that I get it for the cost of materials because the guy who does it in town rents his building from my dad :D
 
Cool, thanks. I would like to find someone in the Houston area that could cut me a deal on the good stuff. Got a buddy who is gonna do a DIY kit that comes with a gun included with the kit. I've seen some of the DIY roll on type stuff that the person sprayed witha cheap gun and it does just not have the same look as a good low or high pressure spray on from a business that does it for a living.
:beer:
 
Procedure for Flare removal:

Option 1:

1. Wheel the piss out of your rig making sure to go through areas where the width of your truck might be questionable. Repeat again until all flares have been torn off.

or, Option 2:

1. Use your hands and tear your flares off. Repeat until all 4 flares are off.

THEN:

1. Die grinder with decent grit pad. Grind away rubber bull**** retainers. Some paint will be grinded away as well. Oh well.

2. #6

3. #6 #2

4. #6. #3. [ at this point alcohol is doing its work ]

5. Weld the friggin holes shut. Make sure your doors are open when you do this (:doh: :rolleyes: )

6. Grind down welds until you feel they are about flush with regular body shape.

7. Primer them over.

8. Herculine or whatever coating you are going to use, away!

Deal is done you are no longer flared.

You feel better and then proceed to ppound another 3-5 #6's down.

Good job!
-o-
 
I'm gonna make a few phone call tomorrow and see what I can find out. Just read a few threads on a guy who had Line-X done and it looks sic. If I can find a good deal gonna do it. It has a good look to it. The flares just don't look quite right to me, I don't like em. Oh well. Let ya'll know what I find out.
:beer:
 
Well beno, that's one way of doing it.

Hey, it worked right....?
P1010061.webp
 
Cool, thanks. I would like to find someone in the Houston area that could cut me a deal on the good stuff. Got a buddy who is gonna do a DIY kit that comes with a gun included with the kit. I've seen some of the DIY roll on type stuff that the person sprayed witha cheap gun and it does just not have the same look as a good low or high pressure spray on from a business that does it for a living.
:beer:

Let me know what you find. I would like to do the "replace the roof rails" with the Line-X style like Tyler and a # of other folks on the board. I live in Houston as well, but have not gotten serious at looking for shops yet.
Signed,

Downtown Houston, crime free garage...
 
mtnspeed, I'll let you know what I find. I've got a uy that I used to work w/ that has a bodyshop and he tol me of a Rhino liner shop on Skyline. I'll get a number and call to see what kinda deal I can get. He did a truck bed for me several years ago, $250 for it. Maybe a two-for-one type deal. I'll let you know what I find out.
Also check out tlcc-houston.org We are a TLCA chapter here in town. You gonna go the LoneStar Toyota Jamboree in Jan in Gilmer?
:beer:
 
Method 2;
Brother buys truck, Brother rolls truck, Buy truck from insurance. Sides and flares are crushed. Roof is crushed. Roof rack and flares go away. Weld holes, fix body. Paint. Smooth and clean, no bedliner.

Chech "Sunny Belly" thread.
 
I used option 1. After the initial shock of dinging my rig I liked the flareless look.
I sanded down the paint and filled the holes with a JB weld type of compound and sanded it flush. I'm waiting till the spring to spray the bed liner.
Chris
 
I just took mine off last week and hid line-x sprayed on. They just used metal tape to cover the holes. Looks great.
 
Back
Top Bottom