Fj80 tps code 41 issues? Tried everything

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 2, 2016
Threads
2
Messages
7
Location
Spokane, WA
1991 fj80 lc. Been sitting since it died (not mine but my mother in laws). Replaced fuel pump, fuel filter, rotor, cap, wires, plugs, belt, radiator, tps, ecm, treated fuel that had been sitting, and replaced it.

Jumped the leads for code 41. Checked resistance and it reads (the tps). It turns over but once it starts it sits at 100-150 rpms on the verge of stalling. Gassing it does nothing. Recently did ecm and still nothing also. Tried two different tps and no change. Thing is in gorgeous shape but just doesnt wake up. Would love some input. Thank you!
 
Sorry for being dense, but could re-state what you mean by this:

...Jumped the leads for code 41. Checked resistance and it reads (the tps)...

Are you observing code 41 by counting the flashing MIL? And exactly what resistance are you measuring?
 
I jumped the e1 and te1 for cel code yes.

I was reading for ANY resistance on the tps itself as well as the harness
 
Best approach is to get an on-line copy of the Factory Service Manual (FSM) and look at the section on the TPS.
 
Replaced fuel pump, fuel filter, rotor, cap, wires, plugs, belt, radiator, tps, ecm, treated fuel that had been sitting, and replaced it.
Let's start from the beginning. Why was the fuel pump, TPS and ECU replaced? Were new OEM parts used?
 
Back
Top Bottom