Fj80 empi birfields

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 10, 2006
Threads
144
Messages
1,029
Location
Minnesota
Has anyone had any good experience with EMPI birfields for the FJ80's? I found a couple threads on the EMPI's but, that was all.

-Pheng
 
EMPI makes good stuff for air-cooled VW's :grinpimp:

I remember seeing EMPI birfs before, they were similarly priced to Longfields...
 
Several of us looked closely at these at SEMA and they appeared to be a Longfield or a copy of one.
So, they don't make the short ones as a direct fit
for the 91-92's?
 
The couple pictures I have seen do not show them with the ABS ring. The ABS ring is difficult to remove without breaking, and it's not something you can order from C-Dan.

I had no trouble with a vice and brass drift. I have a press, but tried it the old-fashioned way and they came off easy. Maybe I got lucky...?

-Spike
 
The couple pictures I have seen do not show them with the ABS ring. The ABS ring is difficult to remove without breaking, and it's not something you can order from C-Dan.

Negative. Brass drift and 2pound hammer and that sucker comes off no problem. I've removed and replaced a number of these with no ill effects or breakage. They are pretty tough.

:grinpimp:

EDIT: Spike beat me to it.
 
Not to hijack the thread, but does anyone have any experience with MAF japanese replacement birfs?
 
Back
Top Bottom