Wanted FJ55 rear motor mount

[CruiserMax]

Location

United States

Mine (left side 1976 Piggie) is busted...

Max

 

[66LWB45]

I should have one from a 74 if you still need it, in New Jersey.

 

[CruiserMax]

I should have one from a 74 if you still need it, in New Jersey.

Yeah! This is a very FJ55 specific part. The bottom bolt has busted from the metal case on mine. How much do you want for it?

Thanks,
Max

 

[66LWB45]

Well I will look at it Monday & let you know.

 

[CruiserMax]

Thanks!

 

[FJ40Jim]

Max,
You need the metal mount that bolts to the bellhousing?
I got them, either side.

Email me if interested.

 

[CruiserMax]

Still looking for this. A couple of leads did not wortk out.

This is the heavy metal(rubber inside) puck thing that cushions the motor/bellhousing inside the frame rails. It has a stud that sticks out on one end a threaded hole for a bolt on the opposite end. I just got done swapping in a clutch and a fresh 4speed etc. The old 4speed would sometimes buck out of 1st (in 2-Hi) when going down hills. I thought the problem was with the tranny but it may be the broken motor mount: the stud has snapped off from the metal casing on the mount.

Here is a photo:

 

[66LWB45]

Hey I can't find anywhere in the rig sorry.

 

[3_puppies]

I've got 2, I could part with one. Pm your email if you want a pic.

Paul