FJ55 model year changes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Ming89FJ62

Pig farmer extraordinaire
GOLD Star
Joined
Jul 31, 2002
Threads
56
Messages
1,788
Location
Northern Green Mountains
OK. I'm getting Arnold, the latest of the pigs, shaken out and comparing it to Wang who I've had for about 3 years. Both are 78 pigs originally fitted w/ CA emmisions, Arnold has a May build date while Wang has a September build date. Arnold has a 3-wire voltage regulator while Wang has a 6 wire voltage regulator. In comparing the two pigs I have a few questions that the FSM doesn't cover:

1. Wang came to me w/ alloy rims but a steel rim w/ hub cap clips on the spare while Arnold has the white painted spoked steel rims. When did/does the change occur - all the literature that I've seen for 78 pigs have steel rims w/ hub caps

2. Arnold has a cable release for the bottom of the rear seat while Wang does not. Was the release standard and a PO just stripped it out of Wang?

Thanks,

Harry

(and yes, I'll post some pics of Arnold over the weekend)
 
Ming89FJ62 said:
1. Wang came to me w/ alloy rims but a steel rim w/ hub cap clips on the spare while Arnold has the white painted spoked steel rims. When did/does the change occur - all the literature that I've seen for 78 pigs have steel rims w/ hub caps

2. Arnold has a cable release for the bottom of the rear seat while Wang does not. Was the release standard and a PO just stripped it out of Wang?
1) Pigs never came stock w/ the white spokes - most likely a PO addition, they didn't show up on the 40's until '81.
2) '9/XX was usually the model year rollout - never seen the cable release however, maybe someone with a late Pig will chime in.

Now lets see some pics of the beast :)

Tucker
 
tucker74 said:
2) '9/XX was usually the model year rollout - never seen the cable release however, maybe someone with a late Pig will chime in.
Tucker

My '74 had the cable release for the lower portion of the back seat.
 
rims should've been steel fromt the factory, either with or without hubcaps.

i pulled a cable release from a 77, so i may have been there on 78 also, not sure, but i really don't see another way to release the seat unless they did like the 60's do and have a strap that comes up from the middle.
 
Our '78 has a cable release for the bottom of rear seat.
 
The 10/78 I own has a cable release for the rear seat don't know about the voltage reg its in a box someware in my garage ......next years project :grinpimp: JC
 
Back
Top Bottom