first mod completed!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 31, 2007
Threads
11
Messages
227
Location
olympia, wa
First of all, big thanks goes out to CDan for excelent service and good prices on parts.

I ordered a bunch of parts from CDan a couple of weeks ago and along with that order was my CDL switch. I finally got around to installing the CDL switch. It was about a 15 min job and most of it was spent glueing the "wood trim" back on. Switches didn't fit through the opening in the wood trim so I had to carefully remove the trim and then glue it back on. I moved the antena up/down switch to the lower left blank space.

Next on the list is the pin 7 mod.
 
Congrats. That's the first thing I did to mine as well. :)
 
That wood grain is a pain when moving switches around. I trimmed mine with an exacto knife to get the switches out.

I had to get rid of the gold on mine first. CDL was my 2nd mod.
 
Last edited:
My first mod too :) Did my Pin/7 at the same time.
 
did that one first, along with the pin 7. easy and makes a difference. well, that is all i've done. next, hmmm....
 
Back
Top Bottom