Fault code help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 13, 2018
Threads
3
Messages
13
Location
Nsw, Australia
hi all, I did the fault code check, hopefully properly. I’ve been having an issue with the cruiser starting on petrol but when you put your foot on the gas pedal it dies. So thought this was a step to check if it shows issues but I can’t work out what lassies is telling me.



Hope that link works

499A83E4-A8AF-448E-97CD-FAEC0CD04619.webp
 
This was the original issue, replaced the air intake vaf and pvc hose, also a fuel filter so thinking it’s a pump issue now but figured someone might be able to read those codes and find a different problem.

 
If i read that right it Looks like code 24, and code 31 to me, but i always use my plug in code scanner to be sure I'm getting the correct codes. Code 24 is Intake air temperature (IAT) sensor- circuit, Possible cause for that code, Wiring, IAT sensor, ECM. Code 31 is Volume air flow (VAF) sensor’- circuit, Possible cause for that code Wiring, VAF sensor, ECM . If you don't already own a copy of the Toyota factory service manual for your year truck you really need to get one. That manual has complete sections in it for each trouble code that will help you step, by step trouble shoot each of those codes. That way you don't needlessly end up spending money replacing parts that aren't the cause of your problem.
 
Last edited:
Just as an FYI, if your new to these trucks, and you need to remove the plug from your VAF sensor, DO NOT REMOVE those 2 Philips screws on either side of that plug!!!! That plug just un clips from the VAF sensor, if you remove those 2 Philips screws, you'll DAMAGE the VAF sensor! That VAF sensor is no longer available from Toyota, so take care of the one you have.
 
Thanks, yeh I know, I replaced the vaf already.
New one was a second of course so could have the same issue but more likely being the wiring or ecu...
I’m hoping wiring at the moment
 
Back
Top Bottom