Fan Clutch Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 9, 2006
Threads
169
Messages
4,455
Location
Dayton, OH
Hey All,

I just finished installing a blue hub fan clutch on my 80. My question is regarding the original factory fan clutch. The one I pulled off had no markings on it what so ever.

Were the fans installed at the factory Aisin units? And if so were they marked?

I am going to post a picture of the old unit later. So not a concern really, just curious.

Couldn't find anything in my search.
 
My old fan clutch said Aisin on it. Just replaced it with a blue hub a couple of weeks ago.
 
All Aisin's that I have seen were marked blue and black hubs, Eaton's aren't marked, hub is bare steel. Most originally came with Eaton, a few had black hub Aisin.
 
Kevin,

Bought the 97 used and it has a blue hub on it. Does that make it a Toyota replacement along the way, or could it have come from the factory that way? Thx. My 93 came from the factory with a black hub Aisin.

DougM
 
Kevin,

Bought the 97 used and it has a blue hub on it. Does that make it a Toyota replacement along the way, or could it have come from the factory that way? Thx. My 93 came from the factory with a black hub Aisin.

DougM

My '96 has an early type blue hub, the rig only had 34K mi on it, thought it was factory. Did the dealer check and it was installed at 25k, the compliant was warm A/C at idle. All blue hubs that I have seen, have been confirmed to be replacements, not saying that some weren't installed from the factory, only that I have never found one. IMHO the black and early blue hubs (all have the cast thermostat spring holder) are the best units.
 
Interesting. The previous owner was meticulous so sounds like he may have changed it out. I'll see if I can get a dental mirror in there to see if it's got a cast holder or the stamped holder like the current blue hubs. I'm planning to fill the black original one I just took off the 93 with 6000cst and use it for trips I know will involve wheeling or towing. I was surprised how gunky the thermo spring was and wondered how much it affected the response to brief hot periods due to the insulative effect of the grundge. And if it would still go through it's complete travel due to grit, etc. Seems like it would handle the movement, but the insulation of the crud would still be a factor.

DougM

DougM
 
Back
Top Bottom