F engine and trails

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2005
Threads
123
Messages
628
Location
Vidor, TX DIXIE
I've been to Gilmer, TX in tacomas before, so I know what those trails look like. I am pickin up a 67 FJ40 with original engine and am not totally comfortable with the F engine and the steepness of some trails. Any of you Texas guys be able to tell me what I'll have to do to prep before going there, ? Also wouldn't mind a Katemcy run since this will be my beater. Any advice will help. Just don't know if this engine will be sufficient.

PS: I do plan on a 350 conversion one day.
 
I run F engines in ALL my trucks, so I am biased. :D

That said, if there is any issues with climbing, it is usually carburetion or gearing, NEITHER of which change just because you have a 350. With an H41 or a Muncie behind the F, the trucks crawl and climb well. A well built and tuned Aisan stock carb mated to a well tuned engine will climb most hills easily.

So what was your question again?

[edit] fixed that!

[2nd edit]Well I do have a 2F in my fj60, but I wasn't counting it when I wrote the post before because it's the one rig that's out of comsission!
 
Last edited:
All I know about Gilmer is that if you have your engine die and you have drum brakes on the front, you are coming back down and fast. Ask Rascal, he was behind me when I make a quick descent in reverse without power while pumping the brakes, trying to start the truck and steer at the same time. Good times!!
 
Thats my worry. Or at least half of it. Theres one hill I believe somewhere after runnin through the creek bed(forgot the trails name) but we were lookin straight up in the air. Kinda worriied about stuff like that. The FJ I'm pickin up has disk rear and drum front(Dont know why). Do you think that will help enough?
 
As far as brakes go, hopefully since you have a disc axle, you have a power booster. That's gonna make a HUGE difference over the original 67 system. If you don't have a booster, GET ONE!

Again, it's not the engine that's the issue.
 
My '75 with booster and 4 drums worked OK at Gilmer..........when I applied all of my 150lbs and all of my body strength to the brake pedal. A well-adjusted emergency brake was handy. To me, the single best upgrade was front discs; made a huge difference.

An average F will be fine, Ive had no problems at Gilmer with my 2F. I do stall at extreme angles, but it's because of the non-stock pos Rochester carb.
Tim
 
I have the original "F" in my '72 FJ40 and have had NO PROBELMS with my Jim C. rebuilt stock AISIN carb on any hill, up or down.

My rig has been pretty much sitting on it's side, probably about 75+ deg. over, and the engine started right up and I backed out of the stuck. LOVE THAT "F"!!!!! I trust my "F" without question.

Jody.
 
Back
Top Bottom