Expert Engine Help Needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Plugs, replaced, rotor okay, changed caps and wires, removed carb float bowl, the float wasn't stuck or sticking, removed the metering block and blew out all the holes with carb cleaner as well as the carb body. Still have a putt-putt when reving the engine. Don't have a vacuum gauge.
 
Please don't burn me for the rookie mistake I made. When something happens to my truck I get a little paranoid.

The clue I overlooked was the sooty fouled plugs in the #1 and #2 cylinders. I pulled the valve cover again and rocked the truck in gear until I could check the adjjustment on those two cylinders. Yes, they were tight, tight enough to cause a problem. Once adjusted to correct warm specs, the putt-putt disappeared. My old F runs smoothly once again.
 
Good to hear you have a happy truck again
 
The valves were adjusted by a shop last year and ran well until last week. I sincerely hope this is all there is to the issue but with a 49 year old engine the troubles may never be far enough away. If the F holds up for the rest of the year I expect to swap it out for a 350 Chevy or 351 Ford. Film at 11.
 
Back
Top Bottom