Engine stud identification

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 14, 2018
Threads
12
Messages
399
Location
Silverthorne, CO
Drove from CO to MO which turned out to be a nice shakedown run for the 80. Temps were a little high so cooking overhaul is definitely on the list.

I was giving the engine a lookover this morning and found a sheared stud and it's nut sitting in the passenger side engine mount. Any idea what this is and how concerned I should be?

Photo of the stud/nut and where it looks to have come from. Any help would be appreciated!

IMG_20190410_105150.webp


IMG_20190410_111301.webp


IMG_20190410_111250.webp


IMG_20190410_105145.webp
 
Looks like exhaust manifold to head stud/nut combo.

Is it a 14mm head on the nut? I can’t tell from the pic on my phone.

If it is, then there you go.

90179-10128
90116-10169

Are what you need.

If it’s smaller 12mm head on the nut then it’s the manifold to downpipe connection.

You’ll need:

90080-17187
90080-12007
 
Back
Top Bottom