So this one will be the repository for engine related videos.
Engine repair videos
- Thread starter OTRAMM
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
Not quite sure where to stick this one so we'll put it under engine. Just got done installing a Safari Snorkel on a 200 Series.
- Thread starter
- #3
Did a quick video on idle mixture setting on a 2F today.
Cruiserdrew
On the way there
Excellent video! Thanks!
- Thread starter
- #5
Got the first half of the 4.7 liter timing belt video series uploaded.
- Thread starter
- #6
Just finished uploading the second half of the 4.7 timing belt video.
- Thread starter
- #7
We shot a quick snow day video on setting the igntion timing on a 1fz-fe today.
- Thread starter
- #9
Very good work Ryan. Great contributions. Giving away your knowledge for free is tough.
I learned everything I know from reading forums, watching videos, and just hanging out with folks that knew more than I did. Figured it was my turn to let some of that back loose in to the wild. And while I'm not very good at making videos, they are kind of fun
Thank you for sharing your videos. What type of harmonic balancer puller is that? I would like one that works like that. It looks like it made short work of pulling and tightening the crank bolt
- Thread starter
- #11
If you're talking about the crank holding tool in the 4.7 timing belt videos it's a CT tools brand holder. The Schley Products (SPtools) ones are much nicer to use. I only bought the CT because the SP's were out of stock when I needed it. My other Toyota crank holders are SP tools.
Thanks. Ill do some googling and see if I can get one.
- Thread starter
- #13
- Thread starter
- #14
Made a quick video of swapping the 1fz distributor o-ring this weekend.
- Thread starter
- #15
I finally got around to making a video for the 80 series oil pump cover o-ring.
- Thread starter
- #16
Shot a quick video on valve clearance for the 1FZ.
davidp14
SILVER Star
I would love one of those balancer removal tools. I hate the idea of bumping the starter to get it off.
- Thread starter
- #18
I'll have to see if i can find the drawing from when I had the guys next door cut it. Or I can see if they're willing to cut some more.
- Thread starter
- #19
Just finished up part one of an updated 4.7 timing belt video.
- Thread starter
- #20