EMU Vs. Downey Spring Package?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 7, 2008
Threads
17
Messages
51
Seems like most people on this board go with the EMU lift kits.

But Downey Offroad is a little closer to me and have a pretty good rep with the 4runner gang.

Any experiance or opinions here with the Downey lift kit? Downey Off-Road

First of many questions...
 
Last edited:
Ran some old Downey arms on my old Toyota pickup. Worked great and lasted forever. I would trust their work and rep. They don't generally sell or make crap products. I'd say go for it and let us know how they work out. I don't understand why there aren't more people here running their springs. Never heard anything bad about them, just not as popular for the 80 series for some reason.
 
Mate here have a downey coils in his 80 .. the most noticeable diference it's they are soft .. much more than EMU coils .. maybe they can be compared to the stock coils .. talking about spring rate.
 
When I asked about the Downey's I remember people saying "You don't want them. They're too soft" I thought about getting their shocks and running the OME springs but went a different route.
 
I like the shocks they use and wouldn't mind softer springs if my rig sat level. Not sure about the weld on part for the caster. Seems like bushings would be easier.

As far as customer treatment, my experience was with ordering some parts for my old pickup. I made a mistake in ordering a part number and got the wrong part (By the way, I hate thier paper catalog that list part numbers but no prices). They took the part back but were a little slow giving me the refund. Seems like it would have been a little easier had they asked some questions about my rig to avoid custmer screw ups like mine.
 
I would say that if you have a stock rig and don't plan to add anything like bumpers or winches, 2nd batteries etc. the Downey's would be a good alternative and support a good local guy that's been in the business for a long time. Downey is still operated by the original guy (Jim Sickles) and for me has always been willing to discuss details about application to this or that on the phone - never seems to be in a hurry to get off the phone. He's a real encyclopedia when it comes to 40's and mini-trucks. Maybe 80's aren't his strong point?

On the other hand, if you need different rate springs for added stuff/weight, Downey products are severely limited - only one choice, OME has the upper hand there. I seem to remember that CDan might have a set of Downey springs in his yard somewhere that he's willing to give away (?)
 
I have Downey springs and Bilsteins. I love the stance. I got 3.25" lift up front and about 3" in the rear. It sits very level, which I like. I think the shocks are great, and the springs are very good. I would however, agree that they may be a little soft. I do 99% of my driving on the road, although the road may be covered with ice and snow. I do no crawling, probably never will get the chance, living in ND. The springs perform very well for my application- the ride is very close to stock I'd say, maybe a tad firmer. I was expecting and would be OK with something a little stiffer. The caster correction was not even an option I considered. I didn't want to weld to my frame and they just look pretty cheesy anyway. I went with MAF/4+ drop brackets. I needed to get back about 5 degrees, no bushings would do that, and the brackets put it right back where it needed to be. Feels perfect. I also happen to believe that there is some merit to the description on the MAF web site about them. They keep the control arms parallel with the frame, as designed, the axle doesn't have to move forward to move up, etc. They work for me. My Cruiser works great for my application. I actually just came in from the garage where I stared at it for the entire last beer. I think I have a (Cruiser) problem. JMHO- Dan.
 
Dang,

There's never a simple answer.

The guys from Downey have been extremely helpful. My minimal experience with MAF has also been good.

When asked to compare the spring packages, the Downey guys said the same thing you all are saying. Their springs are softer than the EMU versions.

Downey recommended a local guy that will do the install. He did their R&D for 20+ years and seems, on the phone, to be a good guy; and economical too.

On the other hand, I need work done on the lockers, and will be having a 34 gal aux tank added, and probably a tire carrier too. So it might be better to have all the work done at a single shop. Unfortunately, that shop is an hour away.

BTW, just priced the 34 gal tank and install at MAF: $1125+$540.

Anyone have work done at Man-A-Fre? If so, what’s your take?
 
Chad,

I'm thinking you’re right.

This truck will be used for the next 6 months as my daily driver. Then it's off to Africa for the 5000+ Mile B2B Rally where I expect to be loaded down with two spares, 40 gallons of fuel, water, tools, spare parts, camping gear, etc.

So taking the hit on road handling for the next six months may be worth it in the long run.

So I’m looking forward to some reviews of the MAF shop. If they get good marks here I'll go up to Simi Valley for the installation.

Otherwise, maybe I’ll buy the parts at MAF and have them installed by the local guy.
 
I agree with Chad. If you're loading up for an expedition, I'd go OME. My rig has no other add ons, and won't for quite some time, but if I was going to add a bunch of weight, I'd probably want something a little stiffer than the Downeys. The other thing is, with the Downeys, you'll sit level with no or a small load. If you added a the kind of weight you're talking about, I think you'd be lower in the rear than the front.
 
If your going to be running all that extra weight, do yourself a favor and go OME. I think you will be happier in the long-run.

Absolutely x2. I have the 44 gal aux tank installed and after that went from light OME's to 864's in the rear which is the heavy duty 50mm height springs - ride is well-mannered. If you plan to do what you say, plan ahead and go heavy now or you'll wish you had. Likely thinking about a winch as well?

Where are you located? There's a few guys around here that have done the lift, it's not that tough if you're moderately handy and have some tools. Even the tank install is do-able with a little help.

If you're not at least moderately handy, it would really be helpful to get to know your rig better in some way if you plan to do some serious African adventure like that.

Good luck. Dan.
 
Good tips guys.

I live in San Pedro. My driveway is too steep to work in and there's no garage. So it's more of a work location issue than anything else.

Still, I'd like to figure a way to do the work myself or with a couple of local MUDers if anyone has some spare time and space (I'll supply the beer, sodas, pizza, etc. and an extra hand with your next project). The DIYS route is looking a lot better since the guy recommended by Downey wants a grand to install the spring kit.

So the plan is to install the MAF OME Deluxe kit and braded brake lines.

Regarding the African Rally: I’m not an experienced mechanic or 4 wheeler; more of an adventurer/traveler type. But I understand the need to learn the truck before going out into the wild. So if any Los Angeles Co MUDers need an extra hand on something you’re working on, IM me and I’ll lend a hand if I can.

Thanks for all the help,
 
Wow, $1,000 for a lift install. Seems a little steep. DIY and use the $$ for some sliders. The shop probably doesn't want to do it maybe?

If you're in Pedro, you're almost just around the corner. If you're not in a hurry, we could probably do something over here if the timing's right. Should take about 4 hours minus the brake lines. I still have to do my brake lines. :D

"So the plan is to install the MAF OME Deluxe kit and braded brake lines."

So you're going the caster correction bushings then? Won't get those in either in 4 hours, but if I can find someone with a press around here, maybe we could time it right and do both yours and mine at the same time.

Lets see what works out in the next little while. Don't forget to check in the SoCal 80's forum here:
CA- SoCal 80's - IH8MUD™ Forums

Dan.
 
I don't mean to add any confusion, but here's my take. I have used both in extreme conditions and tried different rates. Having prerun desert race courses at speed with spare parts, 2 spare tires, 38 gal tank, etc. load with 4 adults. (disclaimer I have stock bumpers and no winch.) I like the control of the Downey springs better, they allow you to use shock valving to setup your rig. Very confortable on the highway. I do have custom 2.5in shocks, but Ivan Stewart had the same springs on his 80 series prerunner. They also last forever.
 
Back
Top Bottom