Early dash instrument panel removal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 5, 2005
Threads
55
Messages
977
Location
ATL
Replacing the hazard bulb and center vents on a 92, but for the life of me I can’t get this top panel off. Have removed 6 screws, but does not seem to want to pull out. Is there something I’m missing? Searching does not give me a whole lot of info on the early 80 series dashes.

image.webp
 
The trick to owning an 80 is going out to do a project, get stumped, get frustrated, start screaming, start a thread here venting and begging for help. Then when you walk back out to your cruiser the solution is obvious; you finish your project and come back here with all the simple answers. :lol: :flipoff2:
 
The trick to owning an 80 is going out to do a project, get stumped, get frustrated, start screaming, start a thread here venting and begging for help. Then when you walk back out to your cruiser the solution is obvious; you finish your project and come back here with all the simple answers. :lol: :flipoff2:
Followed by yet another wave of frustration as you realize you have it almost all back together, but forgot to reconnect the clock......
 
Back
Top Bottom