E locker trouble.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2016
Threads
7
Messages
46
Location
Livermore Fall
So the other day I was wheelling and lockers where working. And then the rear stoped. Took it apart and the magnets fell off inside the motor. And I was wondering if the motor from a transfer lock would be close
 
I'm not certain but I don't believe the center diff motor will work.

You can glue the magnets back on; just get correct polarity. DanKunz and Landtank have written up some details to reattaching magnets.

I'd be tempted to do the air piston conversions couple have performed if mine ever goes south. Camino has some info on this route.
 
I just put a new rear locker actuator in my '91. Be prepared for a bit of sticker shock.

EDIT: If you end up having to replace, the best price I found was from Partsouq.com. $450usd, pn 41450-60042.
 
They are fairly simple. I tried to use JB quick steel to glue them in but I'm not sure if they need to be or not be grounded. So I was gonna get one off the transfer case.
 
Just glue them back in. They aren't conducting, so they don't need to be grounded. Opposite magnets have the same polarity, while the adjacent magnets have the opposite polarity. The problem is that you don't know which pole is N or S without a reference magnet, so if your motor runs the wrong way, you need to swap the wires in the plug.
 
Back
Top Bottom