e-brake Disk Conversion????

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 6, 2005
Threads
59
Messages
1,155
Location
Menlo Park, CA
Hi

I'd like to get some input on the Parking brake Disc conversion. Is it worth doing? Or should I just get the housing machined to fit two gaskets stacked like Marlin does.

The drum is leaking oil and the brake doesn't really work too well either.

Like to hear your opinions

Mark
 
Have yet to hear anything positive about disc brake parking brake on the rear of the tcase....


Have the housing cut to take two SEALS, and rebuild your drum. Mine worked fine holding the 6K# 40 on hills...


When was the last time you tcase was gone through? May be due....



Good luck!


-Steve
 
First off, you need to update your sig line to include your mystery 40!;p

Second, no big fan of the disc conversion either.

Third, you can get a speedo housing already cut and double sealed close by at Mudraks for a good deal and help support a fellow cruiserhead.;)
 
Still going to need some sort of custom flange to bolt the disc and driveshaft to...Mini junk will not bolt up/work on a Cruiser case...


:beer:
 
65swb45 said:
First off, you need to update your sig line to include your mystery 40!;p

Done :grinpimp: I bought the 40 on Saturday. Miker does some Excellent work I must say... It's one of the cleanest I've seen. SO happy it's mine now. My first Cruiser too!


65swb45 said:
Third, you can get a speedo housing already cut and double sealed close by at Mudraks for a good deal and help support a fellow cruiserhead.;)


I'll look into the Mudrak Option. If it's a good deal maybe. I am a machinist so I could do the work myself.


Thanks for the info guys! I wasn't sure if that disk brake option was good or not. Sounds like rebuilding the drum and doing the double seal is the way to go.
 
The disc brake thing is crap. I installed it , drove 30 miles and took it off. The stationary pad was already smoked and the thing was feeble at best. IMO the fixed caliper design that allpro sells for mini's is the answer , just needs to be modified to fit cruiser. The floating caliper/aluminum arm one is for the birds. Ask HONK how he likes it I sold it to him.
 
The transfercase in this cruiser was recently rebuilt.

Mark, as soon as I get the park brake kit and seal, I will ship it to you. Should have it in a day or two. Will let you know when it goes out. According to the description the kit includes shoes, adjuster, springs, etc. Should have about everything you need except second seal if you go the double-seal route. I do recommend the double-seal. I've used it and it does work well. I would have taken care of that if I had noticed it before you purchased.

I don't recall the drum surface having a groove during re-assembly but that was 6 or 8 months ago so I can't say for sure. It could have been during one of those long dark winter nights of wrenching. :D

Pay attention to the shims (and be sure to put them back) and use a Toyota gasket or one the same thickness if you remove the output housing. The t-case was properly shimmed for bearing preload and installing a different kind (thickness) of gasket or none at all will affect preload. I believe I have gasket, if so, I will also include it.

Don't hesitate to call if you have any questions.

Nice avatar!
 
Apparently we wont be hearing any PO crap from Mark about Mike. What a great Seller!
 
Hangtowncruzr said:
Apparently we wont be hearing any PO crap from Mark about Mike. What a great Seller!

I'll X that by 10 Mike is an outstanding guy!!! :beer: :beer: :beer: to him!

Thanks again Mike!!! I appreciate it!:grinpimp:
 
Back
Top Bottom