Dual Valve Stems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 5, 2006
Threads
404
Messages
1,234
Hey folks

New steel wheels are on the way from Cragar. I spec'd out the size, width & BS, and also asked if they could make them with dual valve stems. I got: blah blah blah blah legal blah blah blah structural integrity blah blah blah legal legal legal blah blah blah.

Anybody drilled another hole in their wheel for a second valve stem?
 
Last edited:
Planning on using internal bead locks? Once committed to running an internal, such as Staun, many tire shops won't deal with you for mount and balance. You will need to visit your local off road shop distributor for service.
 
I did it for the speed of it 20 years ago.
Never had a problem. It's just more risk to pinch em on a rock but what are the odds...
 
Racers use dual valve stems to bleed internal air out one, while inflating with nitrogen in the other.

I would like to have one valve stem with a cap but no internal valve, to rapidly deflate. The other with a cap & valve to inflate
 
Last edited:
If you install dual stems, don't permanently remove the valve stem in one to act as a quick deflator. It doesn't work because it's too difficult to get the cap back on with the rushing air coming out. It's also way too easy to have the cap blow out of your fingers trying ... Ending up with a flat tire.
Also it's a safety risk. What if the cap leaks?

I tried it. Definitely not recommended.

I've had dual valve stems on my steel wheels for 25 years. They are way awesome and I wouldn't get aluminum alloys for this reason.

Why are dual stems great?

  1. When in panic air down mode in the mud or part way under water, the valve stem more often than not seems like it's always buried in mud or under water. With 2 stems, one is always out.
  2. If deflating by removing valve stems (the fastest and simplest way) the air gauge can be clamped to one valve while air is being let out of the other. Easy to immediately tell how much air you're letting out.
  3. While inflating with a fast compressor, there's nothing like having the gauge connected to one valve with the compressor clipped on the other. Instantaneous air pressure feedback.
I know ARB makes a safety valve stem deflator and gauge integrated filler, but I prefer this method instead.
 
Might be too late but look into the bird dog wheels which have two holes to run dual valve stems already
 
There are a lot of wheel manufacturers that design dual valve stems like these on my track car.

If you drill your own rims. I strongly recommend that those rims become low speed off road wheels and not everyday wheels.

And never remove valve cores and expect caps to hold air pressure.

And while we are talking valve caps.
Those silly air pressure indicator valve caps are equally just as dangerous. Please do not use them.

Screenshot_2016-06-15-15-00-47.webp
 
I was going to do it on my old wheels, drill a new hole for the stem and plug the old one because the valve stems were inside the rim, it was easier to get metal angled truck stems. Could not use rubber ones, once mud got between the wheel and the caliper they got ripped apart.
35.12.webp
 
Years ago I saw a guy using a radiator drain petcock as a way to rapidly deflate a tire. Worked great.

Like this
images.ashx
 
If you install dual stems, don't permanently remove the valve stem in one to act as a quick deflator. It doesn't work because it's too difficult to get the cap back on with the rushing air coming out. It's also way too easy to have the cap blow out of your fingers trying ... Ending up with a flat tire.
Also it's a safety risk. What if the cap leaks?

I tried it. Definitely not recommended.

I've had dual valve stems on my steel wheels for 25 years. They are way awesome and I wouldn't get aluminum alloys for this reason.

Why are dual stems great?

  1. When in panic air down mode in the mud or part way under water, the valve stem more often than not seems like it's always buried in mud or under water. With 2 stems, one is always out.
  2. If deflating by removing valve stems (the fastest and simplest way) the air gauge can be clamped to one valve while air is being let out of the other. Easy to immediately tell how much air you're letting out.
  3. While inflating with a fast compressor, there's nothing like having the gauge connected to one valve with the compressor clipped on the other. Instantaneous air pressure feedback.
I know ARB makes a safety valve stem deflator and gauge integrated filler, but I prefer this method instead.

this confuses me
 
Back
Top Bottom