dual shocks

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I know JDM market ;)
JDM Style.webp
 
IMO, you are better off going with a larger diameter body shock than with 2 shocks
 
Agreed with the call for better singles... most dual kits are just brackets with off the shelf shocks.

To do it right you would need each shock to carry 1/2 the compression damping and 1/2 the rebound damping and as a result, 1/2 the heat. I seriously doubt A) there is an application from another vehicle that will fit the LC, but have softer valving to use in a double set up, B) anyone is making softer shocks with the right valving specifically for the cruiser, which leaves you with C) custom valved shocks $$$.
 
does anybody knows about a dual shocks kit in the market?
rear and front.

full regards

Why? not being a :censor: but really why? Heat? "coolness" factor? what? I'd agree with above, you have to get really extreme to exceed what a big body single shock would get you. If it's heat then I'd go with a remote set up. http://www.arbusa.com/shock_absorbers_ltr.php

Most dual shock systems are installed for looks more than anything.
 
ok let me explain whit my bad english, here is the think, some friend have a hdj-80 24val, an he already have king spring hd front and rear, but the ome ltr dont come whit the large that he need only the nitrocharge (i presume that he have some kind of suplement on the coils), he have koni heavy track raid shocks, but he said that the lc goes like a boat wen is fully load , he goes to marroco many times a year.
some guy here in spain said that knows a dual shocks kit (front and rear), so i tell him, "let my ask in the landcruiser bibble" the ih8mud forum.

maybe now you understand why i ask this , because i haved clear, king spring and ome ltr.

full regards
 
Back
Top Bottom