driveshafts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2005
Threads
31
Messages
120
Location
arkansas
I just completed a soa on my 40 and am wondering about driveshaft venders. Does anyone know who has the most experience with driveshafts as far as landcruisers goes. So I guess the question is.....Who has bought custom driveshafts and from what venders, how they have performed (quality), price, and how knowledgeable was that vender regarding the fj40. Basically, who do you guys recommend?
 
Last edited by a moderator:
Tom Woods in Ogden UT. http://www.4xshaft.com/index.html Good service, standard parts, very knowledgable, excellent web info source, dedicated Offroader.

Any local shop could probably provide you with the same product... It's a driveshaft...

What's wrong with your font?
 
kchargis said:
I just completed a soa on my 40 and am wondering about driveshaft venders. Does anyone know who has the most experience with driveshafts as far as landcruisers goes. So I guess the question is.....Who has bought custom driveshafts and from what venders, how they have performed (quality), price, and how knowledgeable was that vender regarding the fj40. Basically, who do you guys recommend?



fixed your font... ;)


Jess has taken care of me.

Good luck!


-Steve
 
Gee Wiz! Just about anybody in town can make you a driveshaft if you take in your old one and tell 'em how long you want it...
 
I'm not so sure that every local driveshaft shop has the know how on sourcing long travel, Cruiser compatible yokes (bolt right on to the flange you have or yoke for non-Cruiser axles) like Jess and no doubt Tom Woods do. Spicer any day, but maybe not specialty Toyota. I bet many shops would have to send you to the dealer for Toyota u-joints. And maybe not know that Toyota u-joints are strong for their size.

Kchargis, a better question is do you only need to lengthen the driveshaft and install new u-joints? That would only entail the welding of a longer tube and sourcing Toyota u-joints which is easy work locally. Or do you also need a long travel slip joint? Any non-Cruiser flanges or yokes at the axles or xfer case that would complicate matters?

You'll probably have to investigate the capabilty of local shops if you don't want to go with the proven best, like HighAngle Driveline and Tom Woods. Both shops are very knowledgeable and pretty expensive, BTW.
 
Back
Top Bottom