Driver's window pulled right off the tracks

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 3, 2006
Threads
259
Messages
1,935
Location
Fort Apache: Victoria
I'm stumped here. A couple of months ago, my windows were so slow I dismantled the doors, tested the circuits, greased everything, and it appeared to have helped.

I did a search, but I think my problem might be unrelated to the Slow Window Syndrome.

Yesterday, while cycling-down, the drivers window came down at an angle, and physically separated from the track. If I hold the window in place, I can hear the motor winding up and down when I use the switch.

Right now, I have it in the "up" position, as it appears the track is still keeping the window in place on its own until I fix it.

So I'm preparing to go back in there, but I want to make sure I fix it right this time.

What am I missing?
 
What makes you so special that the cause of your slow window is different from the rest of ours? ;)

Sure sounds typical to me. Too much friction from the old weatherstripping (rubber channels), and the glass gets pulled out of the metal clamp that holds it.

Temp. fix: Put the glass back in the metal clamp, using a little silicone to "glue" it in there. Then lube the rubber channels with WD-40 every week/month/whatever.

Perm. fix: Replace the weatherstripping/channels.

Curtis
 
What makes you so special that the cause of your slow window is different from the rest of ours? ;)

Sure sounds typical to me. Too much friction from the old weatherstripping (rubber channels), and the glass gets pulled out of the metal clamp that holds it.

Temp. fix: Put the glass back in the metal clamp, using a little silicone to "glue" it in there. Then lube the rubber channels with WD-40 every week/month/whatever.

Perm. fix: Replace the weatherstripping/channels.

Curtis

You would think that over time the weather stripping would wear down and be easier, not more difficult, for the glass to travel over. Crazy

I'll get in there and dfo it again. Might be time for new stripping if Mr T isn't too spendy.
 
I've had this happen twice.
Reseating the window was easy enough, just unbolt the track and pull it, along with the window out.

I actually reinforces things this time with some thread lock, as to keep the window better seated.
This however is my temporary fix as the real problem is the rubber tracks and cold temps.
 
The original rubber gets very stiff and prevents easy movement of the window. You find out how stiff once you pull it out and compare it to a new replacement. I had the exact same problem with my HDJ81with which I tried lube, cleaning and everything else. It worked a little bit. However, once the original rubber was replaced, the problem was completely and finally solved. I don't think there is any way around replacing the original, oxidized rubber when these trucks have reached this age.
 
The original rubber gets very stiff and prevents easy movement of the window. You find out how stiff once you pull it out and compare it to a new replacement. I had the exact same problem with my HDJ81with which I tried lube, cleaning and everything else. It worked a little bit. However, once the original rubber was replaced, the problem was completely and finally solved. I don't think there is any way around replacing the original, oxidized rubber when these trucks have reached this age.

Footnote: I keep seeing your old 81 around!
 
Back
Top Bottom