Driver side fender gusset wire ID

[skookum]

Had a rodent chew some wires under my hood and am in the process of fixing them. This bundle of two blue wires coming off what looks like the ABS harness were chewed. They lead inside the fender on the drivers side.

Are these just ground points? If not, what do they lead to?

 

[fil1983]

Those look like the wires leading to the harness for the lock/unlock buzzer. Even if yours doesn't have the actual buzzer hardware, the wiring is there.

 

[Malleus]

Had a rodent chew some wires under my hood and am in the process of fixing them. This bundle of two blue wires coming off what looks like the ABS harness were chewed. They lead inside the fender on the drivers side.

Are these just ground points? If not, what do they lead to?View attachment 4106836

Ground wires are (almost always) white with a black tracer. CANbus networks do not like open circuits. I'd get those reassembled.

 

[skookum]

@fil1983 great tip, thank you. I pulled the gusset as a whole and voila, it is indeed the plug for a lock buzzer.
My LC never came with one so I didn’t notice the lack of functionality after the wires were cut.
I’m thinking of fixing the break and adding a buzzer from an LC to join the rest of you aristocrats with the Toyota beep.

 

[fil1983]

That's exactly what I did. Here's a link to the writeup: Keyless Entry chirp added to 98' 100- EZ Mod - https://forum.ih8mud.com/threads/keyless-entry-chirp-added-to-98-100-ez-mod.44462/post-15956445