Doetsch 8000 valving?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 3, 2004
Threads
144
Messages
921
Location
Frankfort, Kentucky
I talked to Doetsch directly to order some 8000 pre-runner shocks to go with the OME heavies I am going to go with on my FZJ80. Very knowledgeable, knew exactly what vehicle I was talking about springs and all. They were going to call me back with shock numbers.

The message they left asked how I wanted them valved, regular or firm. I have not read anything about an option for valving in these threads on the forum.

All you fellas that love running these Doetsch 8000 shocks, did they give you 2 options for valving on the 8000 pre-runner shocks? Which did you go with?


Thanks.
 
Last edited:
I didn't ask about that. Mine ride fantastic, but I do find myself occasionally wishing they were a little more firm. But that's just me, I like a firmer ride. Really depends on your taste.
 
Ditto what Eicca said.
 
I didn't know they had different valving, not until she left me that in the message. I wasn't prepared to make that choice, didn't know there was one. Maybe it is a new option.

I like firm too but I don't like harsh. I had 8000's on a lighter vehicle and they were harsh. Bone jarring on pot holes and all. I don't like a bunch of dipping and swaying but I also don't like it so stiff your bouncing all over the road.

I will talk to them and see if I can get a feel for what the differences are. Maybe the standard is what they used to all be and now an option to have them valved more firm. Or the other way around.
 
I will say though that I can live with the slight squishiness since the off-road ride quality is unsurpassed, no questions asked.
 
I don't see any valving options mentioned on the website for the 8000 series shocks. I do see that they are rated between medium and firm. So, it may have been a mis-understanding of what she said or a mis-communication on the valving. Whether it can be set or it is between medium and firm.

I will find out today when I call, when California wakes up.

KB
 
Shocks for the 2.5 heavies were 8282SS for the front and 8282 for the rear. SS for Stem/stem she said.

I went with med/firm on the valving. The other option was firm. I am thinking the firm may be the 9000 because she said the 8000 standard valving is med/firm.

We will see as they are in the process of heading my way. $45.75 each plus shipping.

KB
 
The OME shocks that came with my lift are beginning to succumb to the abuse I'm afraid, so I will be in the market soon. But I'm not sure about these shocks... I'm just a little worried I'll feel like a Doetsch bag if I run them.


...:rolleyes: Yeah, yeah... I know that was bad, I just couldn't help myself :D
 
in my defense I failed German in H.S.
I'm sure staying up all night watching Conan O'Brien reruns didn't help either.
 
Shocks for the 2.5 heavies were 8282SS for the front and 8282 for the rear. SS for Stem/stem she said.

I went with med/firm on the valving. The other option was firm. I am thinking the firm may be the 9000 because she said the 8000 standard valving is med/firm.

We will see as they are in the process of heading my way. $45.75 each plus shipping.

KB

Just to make sure, fronts should be stud mount on both ends and the rear should be stud on top and eye on bottom.
 
Just to make sure, fronts should be stud mount on both ends and the rear should be stud on top and eye on bottom.

Correct, what size lift do you have? I'll be selling mine shortly to go with the Fox 2.0s. I have less than 4k miles on them. They were for 4" lift.
 
I have FOR gen II front springs and Ironman 2" rear springs with a 1" spacer. Make me a deal.
 
Back
Top Bottom