Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Check your firewall where the pedals are mounted. I had the original clutch replaced at 200k and the pedal was always a little weird. Turns out the t100s have known failure on the firewall. Not to bad for 200k really. My mechanic, found a premade patch kit and welded it up. Loved that truck, would’ve kept it if the backseat wasn’t so small(kid).I was having trouble with my T100, it has always been kind of a short throw on the pedal. The clutch pedal bracket was prone to failure on those trucks and mine had been replaced prior to purchase 10 years ago. Finally it was getting really bad lately, so I looked into the pedal adjustment. Turns out the pedal was over an inch too low when measured from the floor board, thus making clutch operation incorrect. Throw in 150K miles of additional clutch wear and things just weren't disengaging properly. Re-set pedal height and freeplay and it is like a new truck, who would have thought the tech messed that up so long ago, as I know it was done at a dealer. I feared my tranny was dyeing a slow death at 262K miles. I had similar issues with my 40 a few years ago, both with the clutch pedal and brakes, dialed in the pedal movements and both improved drastically.
Check your firewall where the pedals are mounted. I had the original clutch replaced at 200k and the pedal was always a little weird. Turns out the t100s have known failure on the firewall. Not to bad for 200k really. My mechanic, found a premade patch kit and welded it up. Loved that truck, would’ve kept it if the backseat wasn’t so small(kid).