Do the engine or sell as is?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 9, 2008
Threads
94
Messages
1,940
Location
Lake Arrowhead, CA (was), Rocky Top, TN (is)
I've got a '92 bone-stock FJ80 (except for winch, brush guard, running boards and roof rack and tow package). Though wifey and I love the 3 rows of seats, and the ability to tow, the truck leaves a lot to be desired in our mountain area as far as MPG and power. We'd like to pull a small camping trailer, too, so we're thinking that an upgrade to a newer 80 might be more feasible than fixing the current one - we could get the locking diffs and airbags (important to the :princess:) in a '95 and newer, right?

All this to tell you that the engine is shot and I don't have the time to rebuild or replace the engine myself right now.

What I'm wondering is...should I sell the truck as is (the body is totally rust-free and straight (minor bumps and scratches) and has a VERY clean interior....or should I have a low-mileage import engine dropped in? I found a local shop that will put a 40K original miles 3FE engine in for $2800 out the door - includes installation, misc. parts needed and a 2 year warranty.

If I sold it as it sits now, what do you think is a reasonable price?

3093632738_a09588268f.jpg


3093632840_acc0be98fe.jpg


3093632884_a42835e093.jpg


3092792213_6c4345863b.jpg


3093632964_3ecba90d94.jpg


3093633006_8ee2451472.jpg


3093633048_b78d5a0547.jpg


3093633090_e8e4bbfc2f.jpg


Any input is greatly appreciated....
 
What exactly do you mean by "shot"? Does it still run?

$2800 is a lot to tack on to the price and get it back.

Looks like a very nice and tidy truck.
 
If you are unhappy with the power, another 3fe isn't gonna make you happy.

Buck
 
My buddy just purchased a non running 80 or Craigslist, he paid $1400.00 for it but it is very dirty inside and has surface rust on the rear end because the guy he got it from used it to pull his boat in and out of the water. Yours look really clean, i would try to get 2500 or 3000 if i sold it as is.
However cruiserpart.net has two 3FE for sale. 1 for 1500 and the other for 1200. Shipping would cost a penny but still less than 2800 if you put it in on your own.

My 2 cents
 
I think you should sell the rack and bumper+winch to me, then do what you will with the rest.

But seriously I think you'd be money ahead to sell it as is, unless you can put the motor in yourself.
 
Thanks for the input, guys. I've been searching the classifieds and these trucks aren't bringing in big bucks, even in good running condition. I think you're right, hondaguy6513, that I might be money ahead to sell as is....no time to do a swap myself (or even consider a 350). So, do you think an ask price in as is condition of $3000 would be good? I just put on 4 new 31x10.5x15 BFG AT's.....
 
Thanks for the input, guys. I've been searching the classifieds and these trucks aren't bringing in big bucks, even in good running condition. I think you're right, hondaguy6513, that I might be money ahead to sell as is....no time to do a swap myself (or even consider a 350). So, do you think an ask price in as is condition of $3000 would be good? I just put on 4 new 31x10.5x15 BFG AT's.....

um no. you would be lucky to get that right now if the engine ran fine. 3FE 80's aren't very sought after. I'd say as is 1k to 1500 leaning more towards the 1k. I've seen tons of none running 80's go for that price.
My best advice i'd give you for what you want is to do a V8 swap and have an nice clean 80 with the power to pull things.
Don't want to be a downer on your price to sell but i've seen running 3fe 80's on here for that price that never sold.
 
You might be better off using it for parts yourself or parting it out.

It is a shame to have such a good looking truck and be in that situation.
 
um no. you would be lucky to get that right now if the engine ran fine. 3FE 80's aren't very sought after. I'd say as is 1k to 1500 leaning more towards the 1k. I've seen tons of none running 80's go for that price.
My best advice i'd give you for what you want is to do a V8 swap and have an nice clean 80 with the power to pull things.
Don't want to be a downer on your price to sell but i've seen running 3fe 80's on here for that price that never sold.
Hate to say it, but I agree with lt1fire. The absolute least amount of money you can expect to get for a vehicle is when it's got a major mechanical malfunction (which from what you described is tantamount to not running at all) If you're gonna keep it, do the V8 swap. If you're gonna sell it, sell it for what you can get, but expect to take your lumps.

FWIW (as an example), I just bought a really nice '95 WITH lockers (but with a rod or two knocking) for $1,700. The seller didn't want to spend the money to fix it up, because he didn't know what all was wrong with it. I wouldn't have given him anything for it anyway, because I didn't know what all it needed. In my mind, that's all it was worth with the unknowns. Unfortunately, you're pretty much in the same shape as that Seller.....
 
Thanks again for all the responses. Yes, I'm in the "it-sucks-to-be-you" category with this one....

It is a very good looking truck in great condition (other than the engine). I, too, would hate to part-out such a clean rig...but I guess I'd be open to the idea if there's no better option. With everything on it, I could probably get more for it than trying to sell it as a complete truck with no engine...

Thoughts on that? By the way, I'm in So Cal...if anyone has interest in parts, let me know and I'll make a decision about what direction to take with this thing...
 
Thanks again for all the responses. Yes, I'm in the "it-sucks-to-be-you" category with this one....

It is a very good looking truck in great condition (other than the engine). I, too, would hate to part-out such a clean rig...but I guess I'd be open to the idea if there's no better option. With everything on it, I could probably get more for it than trying to sell it as a complete truck with no engine...

Thoughts on that? By the way, I'm in So Cal...if anyone has interest in parts, let me know and I'll make a decision about what direction to take with this thing...

I really highly recommend you look into putting a v8 into it... that will and should fit your needs.... it is an extremely good looking truck and would be a shame to part it out
V8 swaps don't need to be that expensive even if you have to do it yourself..... so cal has tons of LC shops or any speed shop could help you do that. Used GM Vortec engines can be had for cheap
 
Yes-What is the story? These F series are very durable and it would be odd for a well cared for 3FE to suddenly throw a rod. It sounds like you have rod knock, which is not quite the same thing as throwing a rod through the side of the block or oil pan. Was it run out of oil?

BTW-I'd put the $2800 motor in it. Show me another car for $2800 that will be as good a driver for you, and it's likely that with a low mile motor it could go another 100k miles easy. That truck is clean and nice-just keep driving it.
 
Back
Top Bottom