Do I really need this Fuse?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 31, 2005
Threads
27
Messages
365
Location
Honolulu, HI
I was starting my truck the other day to get off a ferry. The truck would just turn over, but wouldn't start. I got the truck pushed off the ferry and started troubleshooting in the parking lot. The P/O had installed a kill switch, so I started there. I followed the positive line up from the switch and found a fuse. I opened the casing and turns out the fuse was indeed blown. I had to get home, so I bridged the fuse and hurried home. Now, I'm out to sea and have to take the truck in for my yearly inspection when I get back home. My question is: How important is the fuse? Am I risking a lot by keeping it bridged to drive it any further? What's the worst that can happen?
I'm pretty sure the other end of the cable goes to the positive terminal on the battery, but I'm not 100%.
Have any of you had a set up like this?
Thanks in advance,
-Mike
:confused:
 
mikedickbek said:
...My question is: How important is the fuse? Am I risking a lot by keeping it bridged to drive it any further? What's the worst that can happen?
I would suggest you find out exactly what that fuse it for and what it is wired between. If a fuse is blown it is indicative of too much current caused by either too small a fuse for the device used (over current) or a short. If it is a short the worse that could happen is it heats up, causes a fire and bye bye Cruiser.

Pictures?
 
Back
Top Bottom