diff armor. who's got it, what is it?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2003
Threads
490
Messages
9,929
Location
North Cadillac
What are you all that have it using for diff armor? Or, is anyone using it? I have noticed that in the rocks, the guys that aren't running huge tires are hitting diff plugs. I know the face of the diff's aren't exactly stout.

So if you have any protection down there....:o

post it up. Pics are nice too. :cool:
 
Something like this?

This was half a pipe cap left over when Pat Kennedy was making them for sale. He was nice enough to send me this as one of his rejects. I did a fill weld along the one corner and otherwise it is just perfect. I cut some drain slots in the bottom to it doesn't fill with crud too badly.

It's almost 3/8 thick!
Diffcap 001mud.webp
 
Good ideas with the pipe caps. Does anyone sell pre cut, ready to weld covers?

I am sure you would need to drain the fluid out of the diff before welding?
 
Good ideas with the pipe caps. Does anyone sell pre cut, ready to weld covers?

I am sure you would need to drain the fluid out of the diff before welding?

Im looking for one right now too, i cant seem to find the thread that the fella who was making thems was selling them in.

BTW, leave the oil in so that it will absorb the heat and keep the whoel thing from warping.
 
Cool idea, never heard it before. I too will be locating a weld on 8" pipe cap to fashion my own from.

Sort of related, one other thing I did to help protect the drain plug in addition to adding the low profile Camry drain plug is to mig a perimiter bead with a fairly high wire speed around the factory steel protector ring. I did this in three seperate passes building up a "ramp" from the axlehousing up to the height of the protector ring for rocks to slide over and not take as much of a bite out of the protector ring. I did this while the axle housing was out of my truck though so not easy if it is installed.
 
Looks like Marlin sells the covers too, with 2 low pro drain plugs for $69.
http://www.marlincrawler.com/htm/axles.htm

That's the one. I searched the archives because someone else gave me this link and I could not find where it went (I'm loosin' it). :grinpimp: I'm putting it into my Favourites (and will likely forget that I did that too!).

Nice armour for the front diff!
 
I made my own out of an 8" weld cap (plumbing fitting). I work in plumbing wholesale and can get them cheap. You get 2 out of every cap. I donated one to my club and I have made couple others for friends. I don't have any close up pics of them, but they look real good. A notch cut out at the bottom for drainage and a notch on the fill plug side.
 

I got one of the big ones for the front and we foresaw it hitting the panhard on full stuff. Didn't have a ramp, etc to check this theory but better safe than sorry (with a bent panhard)

Ended up cutting a nice portion out of the upper left before welding it on. Anyone else have this problem?
 
80 diff

no plans for the 80 rear diff yet. But the smaller one that just protects the r/g works.

i'll be getting one for my 80. any plans on making em for the bigger cruiser diffs? you guys actually have a price i can afford.
 
I'm not too worried about the main diff housing frankly, but I'm worried about the drain plug and it's protective ring. That is the first one to hit and be ground down. I'm thinking about putting larger stronger ring around it for added protection.
 
Back
Top Bottom