Diagnosing differential vs transfer case

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@Cruiserdrew - Thanks for the best practices example for break in, we will "borrow" that with your permission. Also, not enough diginal ink to properly sing the praises of Ken @gearinstalls.com

Finally, agreed on parts sourcing - there is no reason other than economics to put Chinese gear in your Land Cruiser. Another "best practice - buy OEM equivalent service items from Toyota, @cruiseroutfit , @beno , Georg @orangefj45, etc. but understand why the OEM and OEM equivalent suppliers are a better economic solution over the life-cycle of your parts and your vehicle.

:cheers:


Yeah I'm probably going to go ahead and use those options from now on. I had previously had really good luck with Rockauto, especially ordering Denso or OEM parts from them. But this time they sent me something completely different than what I had ordered. Not the same product at all. So I guess I'll just have to stop being so cheap haha.
 
Great to see some insightful and thorough analysis work out in your favor. This is the sort of thing that requires every break you can get -- and being lucky is often the result of doing the work. Those Chassis Ears sound very effective, could've used something like that a couple of times.

Agree, don't skimp a few $$ on parts -- labor to install is too expensive to need to worry about a subsequent part failure.

On the synth, so long as it's rated for the duty you need and spec-ed for the service, as long as it doesn't leak out after the changeover, you're good. That's usually not an issue now with improved seal conditioners and you're talking pretty gooey stuff compared to engine oil, etc.
 
Yeah I'm probably going to go ahead and use those options from now on. I had previously had really good luck with Rockauto, especially ordering Denso or OEM parts from them. But this time they sent me something completely different than what I had ordered. Not the same product at all. So I guess I'll just have to stop being so cheap haha.

We deal with them a bunch, have had a couple of problems that were quickly resolved, in my experience, great customer service. I would send them an email about the problem.

Understand that they are not a normal parts store, they don't have any parts. Most parts stores have accounts with wholesale distributors (WD), when they say, I can have it here in an hour or whatever, it's coming from a WD. The main local parts store we deal with gets their parts from six local WD.

Rockauto is just an office/web site has accounts with most of the WD across the nation. The parts you see on their web site are the inventory at the WD, it could be next door or clear across the country. When you order, the part(s) are drop shipped from one or more WD, Rockauto never sees them. It's a great, efficient business model, that can save you $$$, but can have occasional oopies. They try to fill the order from the WD as close as possible to the ship to address, so if you order from the local parts store or Rockauto, it's possible that in ether case, could get the same part, from the same place.

In other words, the parts are not cut rate, they are the same as any other parts place would get. The price difference is from the efficient business model, not having to feed local buildings, etc.
 
We deal with them a bunch, have had a couple of problems that were quickly resolved, in my experience, great customer service. I would send them an email about the problem.

Understand that they are not a normal parts store, they don't have any parts. Most parts stores have accounts with wholesale distributors (WD), when they say, I can have it here in an hour or whatever, it's coming from a WD. The main local parts store we deal with gets their parts from six local WD.

Rockauto is just an office/web site has accounts with most of the WD across the nation. The parts you see on their web site are the inventory at the WD, it could be next door or clear across the country. When you order, the part(s) are drop shipped from one or more WD, Rockauto never sees them. It's a great, efficient business model, that can save you $$$, but can have occasional oopies. They try to fill the order from the WD as close as possible to the ship to address, so if you order from the local parts store or Rockauto, it's possible that in ether case, could get the same part, from the same place.

In other words, the parts are not cut rate, they are the same as any other parts place would get. The price difference is from the efficient business model, not having to feed local buildings, etc.


Wow that was a great explanation, thank you for sharing that. You learn something new everyday.

Yeah so far up til this point all my interactions with them have been great. So maybe it was just an issue or mislabeling from a distributor.
 
Back
Top Bottom