Dash Reassembly - Extra Connector? (1 Viewer)

Joined
Mar 6, 2009
Messages
1,810
Location
Between pixels
Finally got around to re-assembly of my dash after completion of some body repair (link below) and I have an "extra" connector (blk & yel) behind the glove box. As far as I can see it doesn't seem to connect to any harness that I can find.
Anyone know what this connector is for?

https://forum.ih8mud.com/threads/a-little-surprise-after-removing-the-windshield.808023/


image.jpg
 
Joined
Mar 6, 2009
Messages
1,810
Location
Between pixels
Haven't got to the clock yet I'm working my way from PS of dash to DS. The connector harness is behind the Engine ECU/ glove box.
 
Joined
Jun 20, 2012
Messages
1,942
Location
Lafayette, CO
Can you get a good pic, face on, to the connector? The EWD has front views of them.

Also, if you could see what color insulation is on the wires, that would help. It may be red/black stripe or like that.

Might be power mirror defrost on your mall cruiser...?
 
Joined
Mar 6, 2009
Messages
1,810
Location
Between pixels
Just found this pic on mud. It looks it might be the black connector just to the top right corner of the "black box". I hope it is, if not I'll have to look at the EWD.

image.jpg
 
Joined
Mar 6, 2009
Messages
1,810
Location
Between pixels
Yes, that is what I was thinking, but I think there is only the one connector for the airbag which is already connected.

image.jpg
 
Joined
Mar 6, 2009
Messages
1,810
Location
Between pixels
:doh:. It was the connector shown in the pic of post #5. Thanks to Alia176 for his great write-up on how to remove the evap for the pic. I'm taking pics as I reassemble the dash and hope to create a detailed thread with pics on removing the dash.
 

jebber

Brokedown southa Dallas
Joined
Aug 24, 2008
Messages
1,373
Location
N. Tejas
We had to replace the heater core in mine a while back and ended up with an extra connector while putting the dash back in. Turned out to be an extra connector that was used in non US trucks for something. They used the same harness so the connector was unused.
 

Users who are viewing this thread

Top Bottom