cruiserparts kit

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 20, 2004
Threads
70
Messages
912
Location
Lakehouse
Is this "kit" from a 60 series front axle?

http://www.cruiserparts.net/parts/parts/diskbrakes.html

This will get me the fine spline birfs and vented rotors.

Anybody have any comments to disadvantages to this setup?

The only mods needed to put this kit on my 75 FJ40 is some grinding, right?

My vehicle will be used 50/50 road/trail. Not hardcore stuff.

I have searched and found lots of opinions on mini-truck swap (dgangle has ALL the threads linked HERE), but not as much stuff on 60 series swaps.

Thanks for the input.
 
The only thing you'll have to do is some grinding on the inner ball to fit the newer birf. This is a used unit and you will probably have to call them to find out what it's out of, it looks like a fj62 in the picture but it could be out of some thing else. You may want to check the rotors when it arrives. I would also get new bearings.
 
I believe this is supposed to be better than the mini swap. I was interested in this kit also. If you get it, let us all know what you think about it?
 
Back
Top Bottom