Cruise Control problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 5, 2006
Threads
167
Messages
1,481
Location
Albany, NY
My cruise control is acting strangely and I was wondering if anyone else had this problems. First it works fine 95% of the time. When it acts up here is what it does. I push the button on the steering wheel and the "Cruise" green light comes one. I then push the leverage to "Set" the speed. It does not engage the green "Cruise" flashes few times and goes off. From that point, I will not be able to engage the cruise control. The green "Cruise" will not come on. To make it work again I have to stop the car and shut it off. I may have to do it twice.
If it works, it will work for the whole trip.
 
I have similar problems with mine also. Like you said it works about 95% of the time. I don't think we are alone.
 
The light is flashing to tell you that there are diagnostic codes you can pull.

Also, at least on earlier models, the cruise control system has its own diagnostics mode that you put it into and then drive around while the various components are tested; pretty cool!

The FSM outlines all of the above. There is no reason to do without cruise control if you don't want to.

Curtis
 
Do a search on this and you will find a way to clean the contacts and fix your problem.........
 
cdan fix - pop the cover off the cruise control module in the engine bay. It's a triangular plastic cover on the PS about half way between the firewall and front. Move the control cable back and forth 10-12 times. It's always been just a temporary fix for me, but it works. Better than replacing the module at $1600! :eek:
 
Back
Top Bottom