Crank position sensor pigtail?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 17, 2019
Threads
16
Messages
81
Location
75455
So i was getting ready to put some parts on under the hood and noticed the crank position harness just hanging there. Thought maybe itd come unplugged, got under the truck and noticed the wires were broke off. Does anybody offer a pigtail i can splice in or am i looking at a new engine harness?
1908577
 
You can use a dental pick to release the wires and connector. Get the same gauge wire, reinstall, presto all is well. Verify with others smarter than me that the wire is not shielded or something fancy.
 
There's a thread here somewhere that shows all the connectors.

Search connectors and you should get it.
 
Yeah the shielded part is further up the harness. Any idea where i can a pigtail? All i find are overseas?
 
I probably have one give me a picture looking down the connector inside. I’ve cut up 2 harnesses during my diesel swap. Kept all the stuff I cut off.
 
I had to replace one of these connectors, the PN was molded on the connector. I just looked it up on ebay and had a slew of options for replacement pigtails.

Quick easy fix.
 
I believe the connector has the p/n molded into it. Should be able to source from Mr. T

Add 90980 to front of number on electrical connectors to get Toyota Part #
 
Yeah but i need a pigtail, that piece of the harness just isnt long enough to just put connectors on. The socket its self is perfectly fine.
1908989
 
Yeah but i need a pigtail, that piece of the harness just isnt long enough to just put connectors on. The socket its self is perfectly fine.
View attachment 1908989
If you plunk 90980 + the PN molded on the connector into the search bar on ebay, you will get a variety of pig tails that work.
 
Found a pigtail and a connector kit with the connector, terminals, and seals. I have a drawer full of wiring so im going to make a color matched pigtail, butt splice it to the factory harness
 
Back
Top Bottom