Cracked Head

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 23, 2009
Threads
5
Messages
26
Location
Knoxville, TN
Has anyone had any experience with having a cracked head repaired? I have talked to a few shops who say they can weld it and fix it. It doesn't seem that I am going to be able to find a new one, so having mine repaired is an option. I understand the area they fix will be stronger than original, but what about the rest of the head. If I can keep the overheating problem away, which I feel we have found and fixed this, should the head be ok?

Thanks
 
Last edited:
On cast heads we would drill out the crack, tap it and install a bunch of inserts with locktite an then cut off the heads and grind it all down then replace the seat. In aluminum heads I have seen people do the same but we always preferred to send them out to be welded.

I'd personally look for a replacement.
 
What engine we talking about here? Miles? History? No idea why you can't find a head - they're everywhere.

DougM
 
that is a 3fe, right? (2 valves/ cyl) ??

Well, it's NOT a 1FZE at least..., so I guess we could assume it's a 3FE, but we really oughta hear it from the OP.

(Oh, and good catch on the valves thing in your earlier post: I read your post and thought, "Now where did the OP say it was a 3FE??" Then after a second or two I went, "Aha!" :D)
 
That head is repairable, although I wouldn't advise a repair because of the area. As others have mentioned, used heads are relativly abundant if you know where to look.
 
It's a 3FE from a 1992 FJ80 with 186k miles on it. I have only been able to find one used (but not warped/crakced) head and that was through cruiserparts.net. They want $400 for it. I have called cylinder head shops all over the US who have all said I will not have an easy time finding one, and that I should have it repaired. Then most of them led to one of two different shops here in the South who both said they can fix it for $250. I have checked all of the local junk yards and it appears that Land Cruisers never make it there. That folks know they can get more money parting one out that selling it to the yard. I am watching craigslist as well to see if I can catch one. However, I may be looking in all the wrong places. If anyone knows of a place(s) that's selling them, I would appreciate their info. I saw the one post above with a link to a thread, and will go through it shortly.

Thanks all.
 
Don't mean to be confrontational, but if I had 7 posts on a forum and a guy with over 4000 posts I'd never met offered to pull a major part for me I'd at least acknowledge him......

Just sayin....

DougM
 
I strongly agree with Doug on this.

BigBear you have a very generous offer from Beno in the post above your last!
 
well boys...I sold, wait if he didn't pay me I guess it's not sold right? Anyway, I GAVE some dude a complete good 3FE that I think he took apart. Came out of a running truck BigBear with 151k on the clock. was a '88 as you can see in my signature. The engine or what's left of it, the dude was going to make a hybrid 2F-3FE motor but got stopped. So anyway, the motor is pulled and might even have the head off so if you're interested let me know--PM--or email me and I'll hook you up with him. He's a mudder too, and the first guy who has even come close to stiffing me on anything. My bad for giving him "credit" I suppose.

No issues with the motor prior to pulling it, ran compression and it had tons of it, motor is nearer to you now that I'm sure it was, this dude's in Florida somewhere spending my $$$!

And yes, absent my connection to a used head, I would for sure NOT weld anything the was an engine component and those heads should be a dime a dozen, you just might need to look under a few rocks to find one.
 
Thanks for the help. My appologies to Beno and Doug. I posted this when I got work today then spent the rest of the day out of the office. I appreciate the advice and will be PMing Beno as to the best way to get in touch with him this evening. I am new to engine work and have spent lot of time the last few weeks on here learning from all of you. I would hope it would take a little more than6.5 hours without a response during a work day to constitute an insult on this message board.
 
Thanks again for the help last night Beno. I checked carparts.net and found a "A" rated head in North Georgia. I am already planning a 1FZ conversion for the future.
 
Back
Top Bottom