Coolant Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 13, 2008
Threads
38
Messages
350
Location
Boulder, CO
Ok I have searched and also checked the FAQ, I have a question on a coolant I just used. It is Peak coolant that says it's compatible with either color of coolant. The link to the product info is below. I did not use that much of it, my coolant reservoir was empty so I filled it with a 50/50 mixture of this stuff. What is everyone's opinion on this? Should I flush and re-fill with red or is this nothing to worry about? I have a 1996 with almost 170K miles.

http://www.peakantifreeze.com/peak_longlife.html
 
Last edited:
from the posts i've read, mixing green and red is a no-no. that said, i don't know anything about peak but one thing i do know is to ensure that our cooling system is in tip-top condition what with all the hg issues we've read. since this is an unknown for me, then i'd rather stay safe with my red than experiment with it. my $.02
 
Last edited:
red used to be a no no. IDK if they've fixed it yet or not. I'm sure they have.


it used to eat aluminum.

the reason IDK is, yellow is fine to me. I've never had the need to have to bother w/ knowing anything about the red...other than back in the day, you didn't use it.
 
Pick a color and stick w/ it. if the vehicle had green coolant as you aquired it, I wouldn't switch colors [to T Red] w/o a major system flush cycle. Ours had green when aquired and after the PM headgasket change we continue to happily run that - using NAPA green made by Zerex - what's referred to as the original green coolant blend as opposed to the more modern works in anything blend.
 
Back
Top Bottom