Console, Tuffy vs. CCOT

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

GreenWeeny78 said:
I have the tuffy with the cd player in it, and all it does is skip on the minor bumps in the road! What cd players are you guys using? I have it securely mounted in the slot with an L bracket and a sleeve. Otherwise i'm rather happy with it.

Travis

Only run an Alpine, they never skip. It is the only headunit I will ever by.

Rezarf <><
 
I also like the tuffy...granted mine was free :D
I just got a JVC CD player that will do mp3s and all that junk. Good price and it plays alot better than the old hand me down sony I had. Haven't had any problems with skipping either.
 
CD players do not like to be run vertically. They have a inner design that is meant to hold the cd horizontally not vertically. Th inner parts of the cd player receive an increased amount of stress when placed vertically. The newer cd players adn some of the higher quality cd players can handle due to better internal parts.
 
hoop5 said:
I have a CCOT and I am taking it back for the Tuffy. The CCOT is made great, but I can't stand having to open the entire lid to get to the cd player. It's even worse when you are driving down the road and having to lift the lid while driving and trying to work the cd player. Just bought the CCOT so they are letting me exchange it for the Tuffy.

Ditto on the CCOT box. I have it and hate opening the lid to operate the stereo. almost wreck it turning the stereo down and the extra money is worth it for the tuffy! Also, yall can run those expensive stereos if you want to. I run a $99 Pioneer and it's never skipped!

Later,
 
Landpimp said:
24799310.jpg

PIMP,

I hope that those seat covers are just to protect a pristine set of OEM (ish) seat covers. I'd hate to think that your green 40 has fugly seats! You have the head rests set so high that I was worried you didn't have any...THAT would have been a crime! (Oh, and your surprise due last Christmas is finally done...will be shipped this week)


ON THE TUFFY issue: Never used/seen a CCOT, my Tuffy has no stereo compartment but my CD player is cleverly installed in the glove box. When you open the glove box door, the CD player moves out and down with the door. I'll post a pic when I get my rig back from Kansas.

-Garth
 
not sure, its 2 years old.

GreenWeeny78 said:
What model are you running from Alpine?
 
all but the driverseat bottom are perfect, like new under the covers. But for the bottom driverseat, I have this
91653516.jpg

91653515.jpg


new OEM........Toyota no makey anymore ;) (so it sits in the bag)

also have another full set of used but perfect covers for spares.

looking forward to it :)

John

Garth1 said:
PIMP,

I hope that those seat covers are just to protect a pristine set of OEM (ish) seat covers. I'd hate to think that your green 40 has fugly seats! You have the head rests set so high that I was worried you didn't have any...THAT would have been a crime! (Oh, and your surprise due last Christmas is finally done...will be shipped this week)


-Garth
 
Do you close the lid on the trail. I know on the rubicon at least, I'm blowing Granite boogers for a week. I would think that would cause havoc on a cd player. That being said, I'm going with the Tuffy
 
I had a Tuffy - they do not make a better box than Tuffy! This bad boy was broken into - but they beat the sh*t outa it and never popped the lock!

I called Tuffy and they wanted a police report / original invoice and they said they would give me another for 1/2 price - problem is we live on the Rez so no police reports - well the cop came and said he would do a report - that was six months ago - so no new Tuffy - but they were super cool - and wanted it back!

:beer: I would buy the TUFFY!
 
Install Question...

So I got my Tuffy the other day, wow, this is a nice unit. It is welded and looks great, all my doubts about the cost vs. quality issues have been put to rest. This is a good looking unit.

Two Questions:

Mine came with a small aluminum tray/box thingy, that doesnt seem to fit any of the holes already in the unit. Anyone know what this is for, it is the width of the tuffy, but it doesnt seem to slide onto any of the bolts that are already there.

Second, how did you guys mount this thing? This will be a tight fit, and I am probably going to rip it out before too long to install a new seat/safety belt strap mount. I looks like I will need to modify it a bit. I guess this is normal huh?

Thanks for any advice.

Rezarf <><
 
I have the Tuffy center console, and one on each fender in the back. Got 'em all keyed the same and put one of their lock on the gas door and my glove box, both also keyed the same as the Tuffy boxes. Very durable and easy to install... and I have a smaller key ring now. :D

If I could only get my 8-tack deck to fit in there. ;)
 
REZARF said:
So I got my Tuffy the other day, wow, this is a nice unit. It is welded and looks great, all my doubts about the cost vs. quality issues have been put to rest. This is a good looking unit.

Two Questions:

Mine came with a small aluminum tray/box thingy, that doesnt seem to fit any of the holes already in the unit. Anyone know what this is for, it is the width of the tuffy, but it doesnt seem to slide onto any of the bolts that are already there.

Second, how did you guys mount this thing? This will be a tight fit, and I am probably going to rip it out before too long to install a new seat/safety belt strap mount. I looks like I will need to modify it a bit. I guess this is normal huh?

Thanks for any advice.

Rezarf <><
I mounted the tray on the inside on the back wall (hinge side) mine had two holes there that matched up, I use it to put change and junk like that in> I also had to drill new hole on the bottom to install on some rail that I fab'd up.
 
yes both of mine had the name nubbins for the tray to slide onto.

TLCSKULLS said:
Mine had two little nubs on the back wall that fit into the holes on the alum. box. I also sue it for change, chapstick, etc.
 
Since we're on this thread, I have a Tuffy in my 40, but I have yet to install my JVC deck. What is used to fill the big hole the stereo sits in? My deck, although standard size, is too small for the opening in the tuffy. Is there suppose to be a filler piece for the tuffy that snugs up the stereo for installation? I bought my Tuffy direct from them, so I know I have everything that came with the unit, but sill, how does the stereo intall in the opening? :confused:
 
I've seen and actually been privileged enough to drive Pimp's mean greeny FJ40. Let me tell you guys.........IT'S NICE! I'm sure that, like most of us with very nice things, he's ultra concervative when it comes to protecting really nice stock steat covers. His Tuffy console is really nice too. Can't remember if he said if he had to unhook and reinstall the rear heater lines. I think that you do.
 
cardinal fang said:
Since we're on this thread, I have a Tuffy in my 40, but I have yet to install my JVC deck. What is used to fill the big hole the stereo sits in? My deck, although standard size, is too small for the opening in the tuffy. Is there suppose to be a filler piece for the tuffy that snugs up the stereo for installation? I bought my Tuffy direct from them, so I know I have everything that came with the unit, but sill, how does the stereo intall in the opening? :confused:

You will need the mounting cage, this is usually an aluminum cage that wraps around the DIN unit. Without it, you will be sliding right through the hole in the Tuffy. It is a pretty standard item at any install shop, they could probably sell you one cheap, however, yours is probably either still in your dash or on the unit itself... maybe not.

Either way you will need a cage that will fit your JVC.

REZARF <><
 
Got the Tuffy put in today.
Little more of a pain to put in than the CCOT but the seperate stereo din is worth it.
almost finished 010 (Small).webp
 
Back
Top Bottom