connector thread on champion radiator

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2006
Threads
500
Messages
3,171
Location
Santa Rosa, CA
I'll champion tomorrow, but can anyone tell me what thread size the transmissions cooling female threads are on a champion radiator. Since there aluminum, I don't want to assume the size and trash the threads. Flared fuel line threads in beautifully, but the fuel line is too small. What can I thread in that will have a 90 and barbs or AN or push/lock?
 
Usually a 5/16” inverted flare, which is 1/2x20 thread. Earls sells the adapter to AN from there. I just did this on an LS swap for my son’s square body.

F3A2803A-F808-4172-BA8D-038397C2C957.webp
 
Back
Top Bottom