-
Updated Classifieds system, post your NEW classifieds here - IH8MUD Classifieds
Conifer Aux. Tank???
- Thread starter big_e_8
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I've looked at a LOT of ConFerr parts over the last 20 years, and that does NOT look like a ConFerr. In fact, I can't remember ANY company that made a double-stepped tank like that. Usually if they 'step' at all [and not all do] they will step on one side of the bed brace and then make a couple of spacers to equalize the pressure against the bed.
It might be homemade.
That would make me wonder if it was completely fluid tight.
I might still be interested. The tank under my 45 got smacked pretty hard a couple of years ago and, even though the resulting crack was welded, the tank still seeps.
I'd offer $100 shipped to Cali if you'll stand behind it if it leaks.
It might be homemade.
That would make me wonder if it was completely fluid tight.
I might still be interested. The tank under my 45 got smacked pretty hard a couple of years ago and, even though the resulting crack was welded, the tank still seeps.
I'd offer $100 shipped to Cali if you'll stand behind it if it leaks.
i stand corrected. upon closer inspection you can see that the bolt holes are located in a different spot than the confer tanks. so it's really a copy of a confer. does look home made.
mark aka 65swb45 has a confer on ebay right now. you can see the differences:
http://cgi.ebay.com/ebaymotors/ws/e...RK:MEWA:IT&viewitem=&item=260071153825&rd=1,1
mark aka 65swb45 has a confer on ebay right now. you can see the differences:
http://cgi.ebay.com/ebaymotors/ws/e...RK:MEWA:IT&viewitem=&item=260071153825&rd=1,1
i'd say that you might wanna pull this "ad" now. posting an auction link to your own junk is a big no-no on here and most sites like this. it's clearly stated in the rules. see reply #2 on here......
you know what you have, you should have a rough idea about how much you want for it. either post a price or delete the thread. enough said.
you know what you have, you should have a rough idea about how much you want for it. either post a price or delete the thread. enough said.
If you DON'T intend to auction it, then post a price AND list the tank dimensions. Now that you've posted the follow up pics, I can tell you that it looks a LOT more like a homemade tank, and I think that ANYONE interested in purchasing it would want to know HOW FAR IT HANGS DOWN.
Clearance is even more of an issue on and FJ40 than it would be on my 45.
Clearance is even more of an issue on and FJ40 than it would be on my 45.