Compression testing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Pull all the plugs at once. Use a screwdriver to hold the throttle in the carb wide open. You want the last cyl to crank as fast as the first cyl so if the battery is weak, you might get lower readings at the end.
 
You might want to test each cylinder twice, I get a bit of difference with my
gage every time I run it. Once you've tested the cyilnders dry, put a small
squirt of motor oil in each spark plug hole and check the compression on
all 6 again. The difference between dry and wet will help you determine
whether low compression is due to valves or rings.
 
Back
Top Bottom