Complete Drop in 3B drivetrain and other Land Cruiser Parts

[canadian bum]

Location

United States

Part of HDJ81
-A442F transmission. Tranny is a 93 and has 163,000kms on it, bolted up behind a 1HD-T. Comes with full time factory tcase. (swapping it for a stick)

Parts off of an 87 HJ61
-PTO winch comes with everything to put into your rig $950
-Large aluminum bumper in perfect shape SOLD
-3 doors LH front and 2 rear power windows 24volt $250 each
-RH front fender in perfect shape $300
-lots of other stuff just ask

Parts off of 78 FJ45
-Rear full float axle 4.10 gears $650 (Can install Toyota Limited slip for $200)
-Front axle with disc brakes, toyota limited slip, and warn hubs (just went through this axle and installed new seals and serviced bearings and birfields) 4.10 gears SOLD
-4 speed tranny and t case for 2F less then 100,000 original km's SOLD

Parts off of 79 BJ40
-Rear semi float axle housing minus gears complete other than third member make an offer
-Front axle with drums complete 4.10 gears $300
-Complete set of leaf springs all with less then 100,000 original km's make an offer
-4 speed tranny off of a B desiel less then 100,000 original km's $400

All parts for the 40 and 45 both cruisers have less then 100,000 orignal km's on them my dad bought them so I am second owner and am in the middle of builds/restorations of both.

Misc.
-3B II engine comes with all accesories and is 12volt. Comes with a Hino water cooled turbo. It is not mounted to the engine. 4 speed tranny and tcase. Complete drop in drivetrain ready to go SOLD

Prices do not include shipping and are in Canadian dollars.

 

[canadian bum]

There are some Pics of the parts in the build up threads. Or below depending on what your looking for.

 

[Red Fox Ranch]

Interested in 3B

PM Sent!

 

[canadian bum]

PTO winch, come with everything needed to mount in and go.

 

[canadian bum]

Pics of the 60

 

[canadian bum]

60 series

 

[canadian bum]

Inside

 

[canadian bum]

Engine and drivetrain is SOLD

 

[doug720]

How much do you want for the ladder? Any idea how much to ship it to 90245...California near LA.

Thanks,


Doug

 

[GLTHFJ60]

How much you looking to get for the seats out of the 61?

 

[89s rule]

Forgot to add seats out of the 60. Have "Turbo" Stitched into the two front bucket seats. Seats are brown and tan. Will get pics up. Have complete set two front buckets and rear bench. $450

How much you looking to get for the seats out of the 61?

I would say $450.


I sent a PM about a few things.

 

[GLTHFJ60]

I would say $450.


I sent a PM about a few things.

In these for sale threads, I tend to read post #1 and skip to the bottom. Are you interested in the seats? I am most definitely interested in the seats.

 

[89s rule]

In these for sale threads, I tend to read post #1 and skip to the bottom. Are you interested in the seats? I am most definitely interested in the seats.

Nope, I am selling my 62. The split rear bench would be nice in a 60 and also the front seats as well. The one issue would be that your passenger would have more adjustments that you would. As they are in different positions. But on the flip side, the passenger probably wouldnt be as worn either like our drivers side.

I think I just confused myself. I understand about the FS threads too. It makes it easier if everythign is priced and updated in the first post.

 

[GLTHFJ60]

Nope, I am selling my 62. The split rear bench would be nice in a 60 and also the front seats as well. The one issue would be that your passenger would have more adjustments that you would. As they are in different positions. But on the flip side, the passenger probably wouldnt be as worn either like our drivers side.

I think I just confused myself. I understand about the FS threads too. It makes it easier if everythign is priced and updated in the first post.

Yeah, I'd love to have the split bench. I'd be able to make a pretty sick storage / sleeping system if I had that.

As for the driver vs passenger seat, you could always swap them side to side. Yeah the adjustments would be against the B pillar, but I bet you'd still have enough room to operate them. Besides, it's not like you adjust them every day.

 

[GLTHFJ60]

PM sent, canadian bum.

 

[canadian bum]

How much do you want for the ladder? Any idea how much to ship it to 90245...California near LA.

Thanks,


Doug

The ladder is tentativly sold. If the deal falls through your next on the list.

 

[Volcano cruiser]

In post #6 of your build thread you show pulling axles of an 80. Still have access to that 80? I'd be interested in the master cylinder and the booster.

 

[canadian bum]

I'm using that for my 40 series. I sold the rest of the 80 series to G&S cruiser parts

 

[phoenix60]

61 misc parts

hi, From the HJ=61 i wonder if you have bulbs in the interior cabin lights, and i'd be interested in the ladder if its not sold yet. Also, looking for one stock rim if you have any kicking around.

 

[canadian bum]

Sorry ladder is sold and I do have bulbs. The rim is 16 inches. But I have a friend with an 80 who is most likely selling his stock 15 inch rim.