clutch slave cylinder

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 19, 2006
Threads
93
Messages
1,386
Location
Tucson
I can't believe I am asking this. Could someone post a pic of how the slave cylinder bolts on to the rear engine mount? I just removed my column shift linkage hardware (going with a floor shift), and can now only find one bolt down for the slave cylinder, and I know it needs two, for the spring hook.

Thanks guys, and Merry Christmas.
 
I found what I was looking for. A search on clutch slave cylinders turned up a thread with pics.

It turns out that the rear bolt (nearest the front of the engine) on the slave cylinder is not anchored to anything, which doesn't make sense to me, given the size of the spring. But, apparently that is the case.
 
018B2.gif
P1080038.jpg


The forward bolt #11 goes through # 75 spring bracket, slave cylinder through # 10 bracket and I put a lock washer and nut the rear bolt goes into the motor mount ;)...Dusty
 
Back
Top Bottom